EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of Charged Nanodroplet Deposition into Microcavity Through Many-Body Dissipative Particle Dynamics

Yiwei Jin, Jiankui Chen, Wei Chen iD, Zhouping Yin

Micromachines · 27.02.2025 · 16 (3) · 278

DOI: 10.3390/mi16030278 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 27.02.2025. Verfasst von Yiwei Jin und 3 weiteren Autor:innen. Beteiligte Einrichtung: The State Key Laboratory of Intelligent Manufacturing Equipment and Technology, School of Mechanical Science and Engineering, HuaZhong University of …. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CUI CAN Program of Guangdong Province, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For a near-eye display, a resolution of over 10,000 pixels per inch (PPI) for the display device is needed to eliminate the “screen door effect” and have better display quality. Electrohydrodynamic (EHD) printing techniques, which have the advantages of a high resolution, wide material applicability and flexibility in patterning, have been widely used in the printing of high-resolution structures. However, due to factors such as the extremely small size of the droplets, the electric charge, the electric field, and the unavoidable positioning error, various deposition defects can occur. For droplets at a nanoscale, the dynamic deposition process is hard to observe. The continuum hypothesis fails and the fluid cannot be described by the traditional Navier–Stokes equation. In this work, the behaviors of charged nanodroplet deposition into a microcavity in an electric field are studied. The many-body dissipative particle dynamics (MDPD) method is used to examine the deformation of the nanodroplet during the impact process at a mesoscale. The dynamic process of charged droplet deposition into a microcavity under an electric field is revealed. Strategies for failure-free printing are proposed by analyzing the influences of the impact speeds, positioning errors, charge levels and electric intensities on the out-of-pixel spread length. The relationship between the internal charge moves and the deformation of the charged droplet in the deposition process is first discussed. The spreading theory of charged droplet deposition into a microcavity with a positioning error is established by analyzing the Coulombic capillary number. Moreover, the printing parameter space that results in successful printing is acquired.

Schlagwörter

Stichwörter der Autor:innen

E-jet printingMDPD methodhigh-resolution displaymesoscale

Autor:innen und Institutionen

  • The State Key Laboratory of Intelligent Manufacturing Equipment and Technology, School of Mechanical Science and Engineering, HuaZhong University of Science and Technology, Wuhan 430074, China.

ORCID-Profile: Wei Chen

Förderung

  • CUI CAN Program of Guangdong Province
  • National Natural Science Foundation of China

Zitieren

APA

Jin, Y., Chen, J., Chen, W., & Yin, Z. (2025). Study of Charged Nanodroplet Deposition into Microcavity Through Many-Body Dissipative Particle Dynamics. Micromachines, 16(3), 278. https://doi.org/10.3390/mi16030278

Vancouver

Jin Y, Chen J, Chen W, Yin Z. Study of Charged Nanodroplet Deposition into Microcavity Through Many-Body Dissipative Particle Dynamics. Micromachines. 2025;16(3):278. doi:10.3390/mi16030278

BibTeX
@article{Jin2025,
  author = {Jin, Yiwei and Chen, Jiankui and Chen, Wei and Yin, Zhouping},
  title = {Study of Charged Nanodroplet Deposition into Microcavity Through Many-Body Dissipative Particle Dynamics},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {3},
  pages = {278},
  doi = {10.3390/mi16030278}
}
Kostenlos starten →