EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Progress in Polycrystalline SiC Growth by Low Pressure Chemical Vapor Deposition and Material Characterization

Michail Gavalas, Yann Gallou, Didier Chaussende iD, Elisabeth Blanquet iD, Frédéric Mercier iD, Konstantinos Zekentes iD

Micromachines · 27.02.2025 · 16 (3) · 276

DOI: 10.3390/mi16030276 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 27.02.2025. Verfasst von Michail Gavalas und 5 weiteren Autor:innen. Beteiligte Einrichtung: SIMAP, Grenoble INP, University Grenoble Alpes CNRS, 38402 Grenoble, France. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 181 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National French Research Agency, Horizon Europe NANOMAT, Horizon Europe.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of this paper is to give a review on the state of the art of polycrystalline SiC material grown by low-pressure chemical vapor deposition (LPCVD). Nowadays, LPCVD is the main technique used for the deposition of polycrystalline SiC, both in academic research and industry. Indeed, the LPCVD technique is today the most mature technique to grow high purity polycrystalline thin films with controlled thickness and structure over a large area (>50 cm) and/or 3D substrate. Its ability to have a high degree of modification on the growth conditions and the chosen precursor system allows the deposition of polycrystalline SiC films in various substrates with tailored properties according to the desired application. After a short introduction on the SiC material and its growth by the LPCVD technique, a review of theoretical studies (thermodynamics and kinetics) related to the CVD SiC growth process is given. A synthesis of the experimental studies is made focusing on the effect of the growth conditions on the properties of the deposited SiC polycrystalline material. Despite the numerous results, a full understanding of them is limited due to the complexity of the LPCVD process and the polycrystalline SiC structure. The conclusions show that the growth conditions, like temperature, chamber pressure, (C/Si)(g), (Cl/Si)(g), and doping have an impact on the microstructure and on the corresponding properties of the polycrystalline SiC films. Future perspectives are given in order to improve our understanding on the polycrystalline–SiC–LPCVD process and to enable the growth of tailor-made polycrystalline SiC films for future applications.

Schlagwörter

Stichwörter der Autor:innen

LPCVDSiCmaterial characterizationpolycrystalline materialthin films

Autor:innen und Institutionen

  • SIMAP, Grenoble INP, University Grenoble Alpes CNRS, 38402 Grenoble, France.
  • Microelectronics Research Group, IESL/FORTH & University of Crete, 71003 Heraklion, Greece.
  • MERSEN, 41 rue Jean Jaurès, 92230 Gennevilliers, France.
  • CROMA, Grenoble INP, University Grenoble Alpes CNRS, 38000 Grenoble, France.

ORCID-Profile: Didier Chaussende, Elisabeth Blanquet, Frédéric Mercier, Konstantinos Zekentes

Förderung

  • National French Research Agency
  • Horizon Europe NANOMAT
  • Horizon Europe

Zitieren

APA

Gavalas, M., Gallou, Y., Chaussende, D., Blanquet, E., Mercier, F., & Zekentes, K. (2025). Progress in Polycrystalline SiC Growth by Low Pressure Chemical Vapor Deposition and Material Characterization. Micromachines, 16(3), 276. https://doi.org/10.3390/mi16030276

Vancouver

Gavalas M, Gallou Y, Chaussende D, Blanquet E, Mercier F, Zekentes K. Progress in Polycrystalline SiC Growth by Low Pressure Chemical Vapor Deposition and Material Characterization. Micromachines. 2025;16(3):276. doi:10.3390/mi16030276

BibTeX
@article{Gavalas2025,
  author = {Gavalas, Michail and Gallou, Yann and Chaussende, Didier and Blanquet, Elisabeth and Mercier, Frédéric and Zekentes, Konstantinos},
  title = {Progress in Polycrystalline SiC Growth by Low Pressure Chemical Vapor Deposition and Material Characterization},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {3},
  pages = {276},
  doi = {10.3390/mi16030276}
}
Kostenlos starten →