EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing the Sensitivity of a Thermal Microflow Sensor: A Comprehensive Modeling and Simulation Study

Junhua Gao, Liangliang Tian, Zhengfu Cheng

Micromachines · 18.02.2025 · 16 (2) · 231

DOI: 10.3390/mi16020231 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 18.02.2025. Verfasst von Junhua Gao und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronic and Information Engineering, Chongqing University of Arts and Sciences, Chongqing 402160, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Research Program of Chongqing Municipal Education Commission.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The advancement of microfluidic technology has introduced new requirements for the sensitivity of microflow sensors. To address this, this paper presents a novel high-sensitivity thermal microflow sensor incorporating a heat-insulating cavity structure. The sensor utilizes porous silicon as the substrate and employs vanadium dioxide as the thermistor element. This study employed COMSOL Multiphysics finite element software 5.6 to investigate the impact of materials and structural factors on the sensor’s sensitivity, as well as considering the dynamic laws governing their influence. Additionally, the effects of thermal expansion and thermal stress on the microstructure of the sensor are thoroughly examined. The research results show that the sensitivity of the sensor was influenced by key factors such as the distance between the heater and the thermistors, the diameter of the flow channel, the power of the heater, and the presence of an insulation cavity. The utilization of B-phase vanadium dioxide, known for its high temperature coefficient of resistance and suitable resistivity, led to a significant reduction in sensor size and a remarkable improvement in sensitivity. The implementation of four thermistors forming a Wheatstone full bridge further enhanced the sensor’s sensitivity. The sensor’s sensitivity was substantially higher when employing a porous silicon substrate compared with a silicon substrate. Moreover, the integration of a micro-bridge and four micro-beams composed of silicon nitride into the sensor’s structure further improved its sensitivity. The proposed design holds promise for enhancing the sensitivity of thermal microflow sensors and offers valuable insights for future advancements in MEMS technology.

Schlagwörter

Stichwörter der Autor:innen

VO2(B)insulation cavityporous siliconsensitivitythermal microflow sensor

Autor:innen und Institutionen

  • School of Electronic and Information Engineering, Chongqing University of Arts and Sciences, Chongqing 402160, China.
  • School of Electronic Engineering, Heilongjiang University, Harbin 150080, China.

Förderung

  • Science and Technology Research Program of Chongqing Municipal Education Commission

Zitieren

APA

Gao, J., Tian, L., & Cheng, Z. (2025). Enhancing the Sensitivity of a Thermal Microflow Sensor: A Comprehensive Modeling and Simulation Study. Micromachines, 16(2), 231. https://doi.org/10.3390/mi16020231

Vancouver

Gao J, Tian L, Cheng Z. Enhancing the Sensitivity of a Thermal Microflow Sensor: A Comprehensive Modeling and Simulation Study. Micromachines. 2025;16(2):231. doi:10.3390/mi16020231

BibTeX
@article{Gao2025,
  author = {Gao, Junhua and Tian, Liangliang and Cheng, Zhengfu},
  title = {Enhancing the Sensitivity of a Thermal Microflow Sensor: A Comprehensive Modeling and Simulation Study},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {2},
  pages = {231},
  doi = {10.3390/mi16020231}
}
Kostenlos starten →