EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Extraction and Assessment of Features Using Shannon Entropy and Rényi Entropy for Chatter Detection in Micro Milling

Zehui Zheng, Xiubing Jing iD, Bowen Song iD, Xiaofei Song, Yun Chen iD, Huaizhong Li iD

Micromachines · 30.01.2025 · 16 (2) · 161

DOI: 10.3390/mi16020161 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 30.01.2025. Verfasst von Zehui Zheng und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Equipment Design and Manufacturing Technology, Tianjin University, Tianjin 300072, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Program of Tianjin Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chatter is a common phenomenon in micromachining processes that adversely affects machining quality, reduces tool life, and generates excessive noise that contributes to environmental pollution. Therefore, the timely detection of chatter is crucial for sustainable production. This paper presents an investigation on the extraction of two types of features, i.e., probability-related and entropy-related, using Shannon entropy and Rényi entropy algorithms, respectively, for chatter detection in micro milling. First, four chatter features were examined using actual machining tests under stable, weak-chatter, and severe-chatter conditions. Second, the proposed chatter features were systematically assessed by combining the characteristic change rates, threshold intervals, and computation times. The results demonstrated that the proposed features can effectively detect the occurrence of chatters at various severity levels. It was found that the probability-related features exhibit better sensitivity compared to entropy-related features, and the features extracted from Shannon entropy algorithm are more sensitive than the Rényi entropy algorithm.

Schlagwörter

Stichwörter der Autor:innen

Rényi entropyShannon entropychatter detectionchatter featuresmicro millingprocess stability

Autor:innen und Institutionen

  • Key Laboratory of Equipment Design and Manufacturing Technology, Tianjin University, Tianjin 300072, China.
  • Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen 361102, China.
  • School of Engineering & Built Environment, Gold Coast Campus, Griffith University, Southport, QLD 4222, Australia.

ORCID-Profile: Xiubing Jing, Bowen Song, Yun Chen, Huaizhong Li

Förderung

  • Program of Tianjin Science and Technology

Zitieren

APA

Zheng, Z., Jing, X., Song, B., Song, X., Chen, Y., & Li, H. (2025). Extraction and Assessment of Features Using Shannon Entropy and Rényi Entropy for Chatter Detection in Micro Milling. Micromachines, 16(2), 161. https://doi.org/10.3390/mi16020161

Vancouver

Zheng Z, Jing X, Song B, Song X, Chen Y, Li H. Extraction and Assessment of Features Using Shannon Entropy and Rényi Entropy for Chatter Detection in Micro Milling. Micromachines. 2025;16(2):161. doi:10.3390/mi16020161

BibTeX
@article{Zheng2025,
  author = {Zheng, Zehui and Jing, Xiubing and Song, Bowen and Song, Xiaofei and Chen, Yun and Li, Huaizhong},
  title = {Extraction and Assessment of Features Using Shannon Entropy and Rényi Entropy for Chatter Detection in Micro Milling},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {2},
  pages = {161},
  doi = {10.3390/mi16020161}
}
Kostenlos starten →