EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Selective Electrochemical Sensor for Bisphenol A Detection Based on Cadmium (II) (bromophenyl)porphyrin and Gold Nanoparticles

Fatma Rejab, Nour Elhouda Dardouri iD, Ahlem Rouis, Mosaab Echabaane iD, Habib Nasri, Boris Lakard iD, Hamdi Ben Halima, Nicole Jaffrezic-Renault

Micromachines · 18.12.2024 · 15 (12) · 1508

DOI: 10.3390/mi15121508 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 18.12.2024. Verfasst von Fatma Rejab und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Sciences of Monastir, Laboratory of Advanced Materials and Interfaces (LIMA), University of Monastir, Avenue of the Environment, Monastir …. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Monastir.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bisphenol A (BPA) is a commonly synthetic chemical mainly used in producing plastic items. It is an endocrine-disrupting compound that causes irreversible health and environmental damage. Developing a simple method for BPA effective quantitative monitoring is emergently necessary. Herein, a novel electrochemical sensor for BPA detection based on [(5,10,15,20-tetrakis(p-bromophenyl) porphyrinato] cadmium (II) [(CdTBrPP)] and gold nanoparticle (AuNPs)-modified screen-printed carbon electrode (SPCE) was elaborated. CdTBrPP was synthesized and then characterized with Ultraviolet–Visible Spectroscopy (UV/vis), Infrared Spectroscopy (IR), and Proton Nuclear Magnetic Resonance Spectroscopy (1H NMR) to confirm its successful synthesis. After drop-coating AuNPs and CdTBrPP on the SPCE, the sensor performance was evaluated using square wave voltammetry (SWV), a linear response in a concentration range from 10−11 M to 10−2 M, with a low detection limit (LOD) of 9.5 pM. The CdTBrPP/AuNPs/SPCE sensor demonstrates a high selectivity and reproducibility, making it a promising candidate for developing a low-cost water-monitoring system for detecting BPA. Additionally, the proposed sensor effectively detected BPA in both tap and mineral water samples.

Schlagwörter

Stichwörter der Autor:innen

bisphenol Acadmium metalloporphyrinelectrochemical sensorsquare wave voltammetry

Autor:innen und Institutionen

  • Faculty of Sciences of Monastir, Laboratory of Advanced Materials and Interfaces (LIMA), University of Monastir, Avenue of the Environment, Monastir 5000, Tunisia.
  • Faculty of Sciences of Monastir, Laboratory of Physical Chemistry of Materials, University of Monastir, Avenue of Environment, Monastir 5019, Tunisia.
  • CRMN, Centre for Research on Microelectronics and Nanotechnology of Sousse, NANOMISENE, LR16CRMN01, Sousse 4054, Tunisia.
  • Institute of UTINAM, UMR-CNRS 6213, University of Franche-Comté, 16 Gray Road, 25030 Besançon, France.

ORCID-Profile: Nour Elhouda Dardouri, Mosaab Echabaane, Boris Lakard

Förderung

  • University of Monastir

Zitieren

APA

Rejab, F., Dardouri, N. E., Rouis, A., Echabaane, M., Nasri, H., Lakard, B., Ben Halima, H., & Jaffrezic-Renault, N. (2024). A Selective Electrochemical Sensor for Bisphenol A Detection Based on Cadmium (II) (bromophenyl)porphyrin and Gold Nanoparticles. Micromachines, 15(12), 1508. https://doi.org/10.3390/mi15121508

Vancouver

Rejab F, Dardouri NE, Rouis A, Echabaane M, Nasri H, Lakard B, et al. A Selective Electrochemical Sensor for Bisphenol A Detection Based on Cadmium (II) (bromophenyl)porphyrin and Gold Nanoparticles. Micromachines. 2024;15(12):1508. doi:10.3390/mi15121508

BibTeX
@article{Rejab2024,
  author = {Rejab, Fatma and Dardouri, Nour Elhouda and Rouis, Ahlem and Echabaane, Mosaab and Nasri, Habib and Lakard, Boris and Ben Halima, Hamdi and Jaffrezic-Renault, Nicole},
  title = {A Selective Electrochemical Sensor for Bisphenol A Detection Based on Cadmium (II) (bromophenyl)porphyrin and Gold Nanoparticles},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {12},
  pages = {1508},
  doi = {10.3390/mi15121508}
}
Kostenlos starten →