Improved DC and RF Characteristics of GaN-Based Double-Channel HEMTs by Ultra-Thin AlN Back Barrier Layer
Micromachines · 30.09.2024 · 15 (10) · 1220
DOI: 10.3390/mi15101220 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 30.09.2024. Verfasst von Qian Yu und 11 weiteren Autor:innen. Beteiligte Einrichtung: State Key Discipline Laboratory of Wide Band-Gap Semiconductor Technology, School of Microelectronics, Xidian University, Xi'an 710071, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the China National Postdoctoral Program for Innovative Talents, the China Postdoctoral Science Foundation.
Abstract (Originalsprache)
In order to improve the off-state and breakdown characteristics of double-channel GaN HEMTs, an ultra-thin barrier layer was chosen as the second barrier layer. The strongly polarized and ultra-thin AlN sub-barrier and the InAlN sub-barrier are great candidates. In this article, the two epitaxial structures, AlGaN/GaN/AlN/GaN (sub-AlN) HEMTs and AlGaN/GaN/InAlN/GaN (sub-InAlN) HEMTs, were compared to select a more suitable sub-barrier layer. Through TEM images of the InAlN barrier layer, the segregation of In components can be seen, which decreases the mobility of the second channel. Thus, the sub-AlN HEMTs have a higher output current density and transconductance than those of the sub-InAlN HEMTs. Because the high-quality AlN barrier layer shields the gate leakage current, a 294 V breakdown voltage was achieved by the sub-AlN HEMTs, which is higher than the 121 V of the sub-InAlN HEMTs. The current gain cut-off frequency (fT) and maximum oscillation frequency (fmax) of the sub-AlN HEMTs are higher than that of the sub-InAlN HEMTs from low to high bias voltage. The power-added efficiency (PAE) and output power density (Pout) of the sub-AlN HEMTs are 57% and 11.3 W/mm at 3.6 GHz and 50 V of drain voltage (Vd), respectively. For the sub-InAlN HEMTs, the PAE and Pout are 41.4% and 8.69 W/mm, because of the worse drain lag ratio. Thus, the Pout of the sub-AlN HEMTs is higher than that of the sub-InAlN HEMTs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Discipline Laboratory of Wide Band-Gap Semiconductor Technology, School of Microelectronics, Xidian University, Xi'an 710071, China.
- ZTE Corporation, Shenzhen 518057, China.
Förderung
- the National Natural Science Foundation of China
- the China National Postdoctoral Program for Innovative Talents
- the China Postdoctoral Science Foundation
- National Natural Science Foundation of China
- China National Postdoctoral Program for Innovative Talents
- China Postdoctoral Science Foundation
- Postdoctoral Fellowship Program of CPSF
- Natural Science Basic Research Program of Shaanxi
Zitieren
APA
Yu, Q., Shi, C., Yang, L., Lu, H., Zhang, M., Zou, X., Wu, M., Hou, B., Gao, W., Wu, S., Ma, X., & Hao, Y. (2024). Improved DC and RF Characteristics of GaN-Based Double-Channel HEMTs by Ultra-Thin AlN Back Barrier Layer. Micromachines, 15(10), 1220. https://doi.org/10.3390/mi15101220
Vancouver
Yu Q, Shi C, Yang L, Lu H, Zhang M, Zou X, et al. Improved DC and RF Characteristics of GaN-Based Double-Channel HEMTs by Ultra-Thin AlN Back Barrier Layer. Micromachines. 2024;15(10):1220. doi:10.3390/mi15101220
BibTeX
@article{Yu2024,
author = {Yu, Qian and Shi, Chunzhou and Yang, Ling and Lu, Hao and Zhang, Meng and Zou, Xu and Wu, Mei and Hou, Bin and Gao, Wenze and Wu, Sheng and Ma, Xiaohua and Hao, Yue},
title = {Improved DC and RF Characteristics of GaN-Based Double-Channel HEMTs by Ultra-Thin AlN Back Barrier Layer},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {10},
pages = {1220},
doi = {10.3390/mi15101220}
}
EUVIMED