EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on the Magnetorheological Finishing Technology of a High-Steepness Optical Element Based on the Virtual-Axis and Spiral Scanning Path

Chihao Chen, Chaoliang Guan, Meng Liu, Yifan Dai, Hao Hu

Micromachines · 15.09.2024 · 15 (9) · 1154

DOI: 10.3390/mi15091154 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 15.09.2024. Verfasst von Chihao Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Intelligent Science and Technology, National University of Defense Technology, Changsha 410073, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, XX ultra-precision machining and manufacturing production line project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetorheological finishing (MRF) of aspherical optical elements usually requires the coordination between the translational axes and the oscillating axes of the machine tool to realize the processing. For aspheric optical elements whose steepness exceeds the machining stroke of the equipment, there is still no better method to achieve high-precision and high-efficiency error convergence. To solve this problem, an MRF method combining virtual-axis technology and a spiral scanning path is proposed in this paper. Firstly, the distribution law of the magnetic induction intensity inside the polishing wheel is analyzed by simulation, the stability of the removal efficiency of the removal function within the ±7∘ angle of the normal angle of the polishing wheel is determined, and MRF is expanded from traditional single-point processing to circular arc segment processing. Secondly, the spiral scanning path is proposed for aspherical rotational symmetric optical elements, which can reduce the requirements of the number of machine tool axes and the dynamic performance of machine tools. Finally, an aspherical fused silica optical element with a curvature radius of 400 mm, K value of −1, and aperture of 100 mm is processed. The PV value of this optical element converges from 189.2 nm to 24.85 nm, and the RMS value converges from 24.85 nm to 5.74 nm. The experimental results show that the proposed combined process has the ability to modify curved optical elements and can be applied to ultra-precision machining of high-steepness optical elements.

Schlagwörter

Stichwörter der Autor:innen

MRFhigh-steepnessspherical/aspheric optical componentsspiral scanning pathvirtual-axis

Autor:innen und Institutionen

  • College of Intelligent Science and Technology, National University of Defense Technology, Changsha 410073, China.
  • National Key Laboratory of Equipment State Sensing and Smart Support, Changsha 410073, China.

Förderung

  • National Natural Science Foundation of China
  • XX ultra-precision machining and manufacturing production line project

Zitieren

APA

Chen, C., Guan, C., Liu, M., Dai, Y., & Hu, H. (2024). Research on the Magnetorheological Finishing Technology of a High-Steepness Optical Element Based on the Virtual-Axis and Spiral Scanning Path. Micromachines, 15(9), 1154. https://doi.org/10.3390/mi15091154

Vancouver

Chen C, Guan C, Liu M, Dai Y, Hu H. Research on the Magnetorheological Finishing Technology of a High-Steepness Optical Element Based on the Virtual-Axis and Spiral Scanning Path. Micromachines. 2024;15(9):1154. doi:10.3390/mi15091154

BibTeX
@article{Chen2024,
  author = {Chen, Chihao and Guan, Chaoliang and Liu, Meng and Dai, Yifan and Hu, Hao},
  title = {Research on the Magnetorheological Finishing Technology of a High-Steepness Optical Element Based on the Virtual-Axis and Spiral Scanning Path},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {9},
  pages = {1154},
  doi = {10.3390/mi15091154}
}
Kostenlos starten →