EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Integrated Amorphous Carbon Film Temperature Sensor with Silicon Accelerometer into MEMS Sensor

Qi Zhang iD, Xiaoya Liang, Wenzhe Bi, Xing Pang, Yulong Zhao

Micromachines · 12.09.2024 · 15 (9) · 1144

DOI: 10.3390/mi15091144 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 12.09.2024. Verfasst von Qi Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Amorphous carbon (a-C) has promising potential for temperature sensing due to its outstanding properties. In this work, an a-C thin film temperature sensor integrated with the MEMS silicon accelerometer was proposed, and a-C film was deposited on the fixed frame of the accelerometer chip. The a-C film was deposited by DC magnetron sputtering and linear ion beam, respectively. The nanostructures of two types of films were observed by SEM and TEM. The cluster size of sp2 was analyzed by Raman, and the content of sp2 and sp3 of the carbon film was analyzed by XPS. It showed that the DC-sputtered amorphous carbon film, which had a higher sp2 content, had better temperature-sensitive properties. Then, an integrated sensor chip was designed, and the structure of the accelerometer was simulated and optimized to determine the final sizes. The temperature sensor module had a sensitivity of 1.62 mV/°C at the input voltage of 5 V with a linearity of 0.9958 in the temperature range of 20~150 °C. The sensitivity of the sensor is slightly higher than that of traditional metal film temperature sensors. The accelerometer module had a sensitivity of 1.4 mV/g/5 V, a nonlinearity of 0.38%, a repeatability of 1.56%, a total thermomechanical noise of 509 μg over the range of 1 to 20 Hz, and an average thermomechanical noise density of 116 µg/√Hz, which is smaller than the input acceleration amplitude for testing sensitivity. Under different temperatures, the performance of the accelerometer was tested. This research provided significant insights into the convenient procedure to develop a high-performance, economical temperature–accelerometer-integrated MEMS sensor.

Schlagwörter

Stichwörter der Autor:innen

MEMSTemperature-Resistance Characteristicsamorphous carbon filmintegrated sensorsilicon accelerator

Autor:innen und Institutionen

  • State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
  • Electronic Materials Research Lab, Key Lab of Education Ministry, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China.

ORCID-Profile: Qi Zhang

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Zhang, Q., Liang, X., Bi, W., Pang, X., & Zhao, Y. (2024). Integrated Amorphous Carbon Film Temperature Sensor with Silicon Accelerometer into MEMS Sensor. Micromachines, 15(9), 1144. https://doi.org/10.3390/mi15091144

Vancouver

Zhang Q, Liang X, Bi W, Pang X, Zhao Y. Integrated Amorphous Carbon Film Temperature Sensor with Silicon Accelerometer into MEMS Sensor. Micromachines. 2024;15(9):1144. doi:10.3390/mi15091144

BibTeX
@article{Zhang2024,
  author = {Zhang, Qi and Liang, Xiaoya and Bi, Wenzhe and Pang, Xing and Zhao, Yulong},
  title = {Integrated Amorphous Carbon Film Temperature Sensor with Silicon Accelerometer into MEMS Sensor},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {9},
  pages = {1144},
  doi = {10.3390/mi15091144}
}
Kostenlos starten →