EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low-Damage Trimming of Micro Hemispherical Resonators by Chemical Etching

Zhongzhe Zhou, Kun Lu, Yan Shi, Xiang Xi, Jiangkun Sun, Dingbang Xiao, Xuezhong Wu

Micromachines · 29.08.2024 · 15 (9) · 1094

DOI: 10.3390/mi15091094 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 29.08.2024. Verfasst von Zhongzhe Zhou und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Intelligence Science and Engineering, National University of Defense Technology, Changsha 410073, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Laboratory of Satellite Navigation Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance the performance of micro-hemispherical gyroscopes, achieving low-damage and high-surface-quality trimming is essential. This enables greater stability and reliability for the gyroscopes. Current methods for reducing frequency split often come with drawbacks such as high cost, adverse effects on the Q-factor, or surface damage. In this paper, a chemical etching trimming method is proposed to reduce frequency split in micro-hemispherical resonators. This method allows for trimming with minimal damage, while also being cost-effective and easy to implement. The theoretical basis of this method was analyzed, followed by a simulation to determine the optimal trimming range and location on the resonator. The simulated Q-factor analysis before and after trimming preliminarily validated the method’s low-damage characteristics. Ultimately, the frequency split of the resonator was reduced to below 1 Hz. Additionally, test results of the Q-factor and surface quality before and after trimming further confirmed that chemical etching offers effective low-damage trimming capabilities. The proposed method holds significant potential for improving the performance of micro-hemispherical resonator gyroscopes.

Schlagwörter

Stichwörter der Autor:innen

chemical etchinglow-damage trimmingmicro hemispherical

Autor:innen und Institutionen

  • College of Intelligence Science and Engineering, National University of Defense Technology, Changsha 410073, China.

Förderung

  • National Natural Science Foundation of China
  • Key Laboratory of Satellite Navigation Technology

Zitieren

APA

Zhou, Z., Lu, K., Shi, Y., Xi, X., Sun, J., Xiao, D., & Wu, X. (2024). Low-Damage Trimming of Micro Hemispherical Resonators by Chemical Etching. Micromachines, 15(9), 1094. https://doi.org/10.3390/mi15091094

Vancouver

Zhou Z, Lu K, Shi Y, Xi X, Sun J, Xiao D, et al. Low-Damage Trimming of Micro Hemispherical Resonators by Chemical Etching. Micromachines. 2024;15(9):1094. doi:10.3390/mi15091094

BibTeX
@article{Zhou2024,
  author = {Zhou, Zhongzhe and Lu, Kun and Shi, Yan and Xi, Xiang and Sun, Jiangkun and Xiao, Dingbang and Wu, Xuezhong},
  title = {Low-Damage Trimming of Micro Hemispherical Resonators by Chemical Etching},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {9},
  pages = {1094},
  doi = {10.3390/mi15091094}
}
Kostenlos starten →