EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reliability Simulation Analysis of TSV Structure in Silicon Interposer under Temperature Cycling

Wenchao Tian, Haojie Dang iD, Dexin Li, Yunhao Cong, Yuanming Chen

Micromachines · 30.07.2024 · 15 (8) · 986

DOI: 10.3390/mi15080986 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 30.07.2024. Verfasst von Wenchao Tian und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Electro-Mechanical Engineering, Xidian University, Xi'an 710000, China. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As semiconductor integration scales expand and chip sizes shrink, Through Silicon Via (TSV) technology advances towards smaller diameters and higher aspect ratios, posing significant challenges in thermo-mechanical reliability, particularly within interposer substrates where mismatched coefficients of thermal expansion exacerbate issues. This study conducts a thermo-mechanical analysis of TSV structures within multi-layered complex interposers, and analyzes the thermal stress behavior and reliability under variable temperature conditions (−55 °C to 85 °C), taking into account the typical electroplating defects within the copper pillars in TSVs. Initially, an overall model is established to determine the critical TSV locations. Sub-model analysis is then employed to investigate the stress and deformation of the most critical TSV, enabling the calculation of the temperature cycle life accordingly. Results indicate that the most critical TSV resides centrally within the model, exhibiting the highest equivalent stress. During the temperature cycling process, the maximum deformation experiences approximately periodic variations, while the maximum equivalent stress undergoes continuous accumulation and gradually diminishes. Its peak occurs at the contact interface corner between the TSV and Redistribution Layer (RDL). The estimated life of the critical point is 3.1708 × 105 cycles. Furthermore, it is observed that electroplating defect b alleviates thermal stress within TSVs during temperature cycling. This study provides insights into TSV thermal behavior and reliability, which are crucial for optimizing the design and manufacturing processes of advanced semiconductor packaging.

Schlagwörter

Stichwörter der Autor:innen

electroplating defectmulti-layered interposersreliabilitytemperature cycling

Autor:innen und Institutionen

  • School of Electro-Mechanical Engineering, Xidian University, Xi'an 710000, China.
  • State Key Laboratory of Electromechanical Integrated Manufacturing of High-Performance Electronic Equipments, Xidian University, Xi'an 710000, China.
  • Shanghai Sharetek Technology Co., Ltd., Shanghai 201109, China.

ORCID-Profile: Haojie Dang

Zitieren

APA

Tian, W., Dang, H., Li, D., Cong, Y., & Chen, Y. (2024). Reliability Simulation Analysis of TSV Structure in Silicon Interposer under Temperature Cycling. Micromachines, 15(8), 986. https://doi.org/10.3390/mi15080986

Vancouver

Tian W, Dang H, Li D, Cong Y, Chen Y. Reliability Simulation Analysis of TSV Structure in Silicon Interposer under Temperature Cycling. Micromachines. 2024;15(8):986. doi:10.3390/mi15080986

BibTeX
@article{Tian2024,
  author = {Tian, Wenchao and Dang, Haojie and Li, Dexin and Cong, Yunhao and Chen, Yuanming},
  title = {Reliability Simulation Analysis of TSV Structure in Silicon Interposer under Temperature Cycling},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {8},
  pages = {986},
  doi = {10.3390/mi15080986}
}
Kostenlos starten →