An FEM Study on Minimizing Electrostatic Cross-Talk in a Comb Drive Micro Mirror Array
Micromachines · 24.07.2024 · 15 (8) · 942
DOI: 10.3390/mi15080942 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 24.07.2024. Verfasst von Andreas Neudert und 2 weiteren Autor:innen. Beteiligte Einrichtung: Fraunhofer Institute for Photonic Microsystems IPMS, Maria-Reiche Str. 2, 01109 Dresden, Germany. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union Horizon 2020, European Union’s Horizon 2020 project REALHOLO.
Abstract (Originalsprache)
We are developing a phase-modulating micro mirror-array spatial light modulator to be used for real holography within the EU-funded project REALHOLO, featuring millions of pixels that can be individually positioned in a piston mode at a large frame rate. We found earlier that an electrostatic comb-drive array offers the best performance for the actuators: sufficient yoke forces for fast switching even at low voltages compatible with the CMOS addressing backplane. In our first design, the well-known electrostatic cross-talk issue had already been much smaller than would have been possible for parallel-plate actuators, but it was still larger than the precision requirements for high-image-quality holography. In this paper, we report on our analysis of the crucial regions for the electrostatic cross-talk and ways to reduce it while observing manufacturing constraints as well as avoiding excessively high field strengths that might lead to electrical breakdown. Finally, we present a solution that, in FEM simulations, reduces the remaining cross-talk to well below the required specification limit. This solution can be manufactured without any additional processing steps and suffers only a very small reduction of the yoke forces.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Fraunhofer Institute for Photonic Microsystems IPMS, Maria-Reiche Str. 2, 01109 Dresden, Germany.
ORCID-Profile: Andreas Neudert, Peter Duerr
Förderung
- European Union Horizon 2020
- European Union’s Horizon 2020 project REALHOLO
Zitieren
APA
Neudert, A., Duerr, P., & Nitzsche, M. (2024). An FEM Study on Minimizing Electrostatic Cross-Talk in a Comb Drive Micro Mirror Array. Micromachines, 15(8), 942. https://doi.org/10.3390/mi15080942
Vancouver
Neudert A, Duerr P, Nitzsche M. An FEM Study on Minimizing Electrostatic Cross-Talk in a Comb Drive Micro Mirror Array. Micromachines. 2024;15(8):942. doi:10.3390/mi15080942
BibTeX
@article{Neudert2024,
author = {Neudert, Andreas and Duerr, Peter and Nitzsche, Mario},
title = {An FEM Study on Minimizing Electrostatic Cross-Talk in a Comb Drive Micro Mirror Array},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {8},
pages = {942},
doi = {10.3390/mi15080942}
}
EUVIMED