Design of X-Band Circulator and Isolator for High-Peak-Power Applications
Micromachines · 16.07.2024 · 15 (7) · 916
DOI: 10.3390/mi15070916 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 16.07.2024. Verfasst von Tao Tang und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Electronic and Information, Southwest Minzu University, Chengdu 610225, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Southwest Minzu University Research Startup Funds, Deputyship for Research and Innovation, Ministry of Education in Saudi Arabia.
Abstract (Originalsprache)
This paper presents a design of a X-band circulator–isolator for handling high-peak-power applications. The device consists of two cascade-connected ferrite circulators, with one dedicated to transmission and the other to small-signal reception coupled with high-power signal isolation. To improve the power capacity, a layer of poly-tetra fluoroethylene (PTFE) film is placed above and below the circulator’s and the isolator’s center conductors. Measurement results show that the device is capable of withstanding a peak power of 7000 W, with an insertion loss of
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Electronic and Information, Southwest Minzu University, Chengdu 610225, China.
- Electrical Engineering Department, College of Engineering, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia.
ORCID-Profile: Tao Tang, Xiexun Zhang, Maged A Aldhaeebi, Thamer S Almoneef
Förderung
- Southwest Minzu University Research Startup Funds
- Deputyship for Research and Innovation, Ministry of Education in Saudi Arabia
Zitieren
APA
Tang, T., Zhang, X., Aldhaeebi, M. A., & Almoneef, T. S. (2024). Design of X-Band Circulator and Isolator for High-Peak-Power Applications. Micromachines, 15(7), 916. https://doi.org/10.3390/mi15070916
Vancouver
Tang T, Zhang X, Aldhaeebi MA, Almoneef TS. Design of X-Band Circulator and Isolator for High-Peak-Power Applications. Micromachines. 2024;15(7):916. doi:10.3390/mi15070916
BibTeX
@article{Tang2024,
author = {Tang, Tao and Zhang, Xiexun and Aldhaeebi, Maged A and Almoneef, Thamer S},
title = {Design of X-Band Circulator and Isolator for High-Peak-Power Applications},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {7},
pages = {916},
doi = {10.3390/mi15070916}
}
EUVIMED