EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Alternative Micro-Milling Fabrication Process for Rapid and Low-Cost Microfluidics

Martin Christopher Allen iD, Simon Lookmire, Ebubekir Avci iD

Micromachines · 11.07.2024 · 15 (7) · 905

DOI: 10.3390/mi15070905 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 11.07.2024. Verfasst von Martin Christopher Allen und 2 weiteren Autor:innen. Beteiligte Einrichtung: College of Sciences, School of Food and Advanced Technology, Massey University, Palmerston North 4410, New Zealand. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Palmerston North Medical Research Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microfluidics is an important technology for the biomedical industry and is often utilised in our daily lives. Recent advances in micro-milling technology have allowed for rapid fabrication of smaller and more complex structures, at lower costs, making it a viable alternative to other fabrication methods. The microfluidic chip fabrication developed in this research is a step-by-step process with a self-contained wet milling chamber. Additionally, ethanol solvent bonding is used to allow microfluidic chips to be fully fabricated within approximately an hour. The effect of using this process is tested with quantitative contact profileometery data to determine the expected surface roughness in the microchannels. The effect of surface roughness on the controllability of microparticles is tested in functional microfluidic chips using image processing to calculate particle velocity. This process can produce high-quality channels when compared with similar studies in the literature and surface roughness affects the control of microparticles. Lastly, we discuss how the outcomes of this research can produce rapid and higher-quality microfluidic devices, leading to improvement in the research and development process within the fields of science that utilise microfluidic technology. Such as medicine, biology, chemistry, ecology, and aerospace.

Schlagwörter

Stichwörter der Autor:innen

CNCimage processingmicro-CNC millingmicrofabricationmicrofluidicsmicroparticle manipulationprofilometry

Autor:innen und Institutionen

  • College of Sciences, School of Food and Advanced Technology, Massey University, Palmerston North 4410, New Zealand.
  • The MacDiarmid Institute, Victoria University of Wellington, P.O. Box 600, Wellington 6140, New Zealand.

ORCID-Profile: Martin Christopher Allen, Ebubekir Avci

Förderung

  • Palmerston North Medical Research Fund

Zitieren

APA

Allen, M. C., Lookmire, S., & Avci, E. (2024). An Alternative Micro-Milling Fabrication Process for Rapid and Low-Cost Microfluidics. Micromachines, 15(7), 905. https://doi.org/10.3390/mi15070905

Vancouver

Allen MC, Lookmire S, Avci E. An Alternative Micro-Milling Fabrication Process for Rapid and Low-Cost Microfluidics. Micromachines. 2024;15(7):905. doi:10.3390/mi15070905

BibTeX
@article{Allen2024,
  author = {Allen, Martin Christopher and Lookmire, Simon and Avci, Ebubekir},
  title = {An Alternative Micro-Milling Fabrication Process for Rapid and Low-Cost Microfluidics},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {7},
  pages = {905},
  doi = {10.3390/mi15070905}
}
Kostenlos starten →