EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Lego-Like Reconfigurable Microfluidic Stabilizer System with Tunable Fluidic RC Constants and Stabilization Ratios

Wuyang Zhuge, Weihao Li, Kaimin Wang, Zhuodan Chen, Chunhui Wu, Kyle Jiang, Jun Ding, Carl Anthony, Xing Cheng

Micromachines · 28.06.2024 · 15 (7) · 843

DOI: 10.3390/mi15070843 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 28.06.2024. Verfasst von Wuyang Zhuge und 8 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong-Hong Kong-Macau Joint Laboratory on Micro-Nano Manufacturing Technology, Department of Materials Science and Engineering, Southern Universi…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong-Hong Kong-Macau Joint Laboratory on Micro-Nano Manufacturing Technology, Shenzhen Science and Technology Innovation Committee for Talent Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In microfluidic systems, it is important to maintain flow stability to execute various functions, such as chemical reactions, cell transportation, and liquid injection. However, traditional flow sources, often bulky and prone to unpredictable fluctuations, limit the portability and broader application of these systems. Existing fluidic stabilizers, typically designed for specific flow sources, lack reconfigurability and adaptability in terms of the stabilization ratios. To address these limitations, a modular and standardized stabilizer system with tunable stabilization ratios is required. In this work, we present a Lego-like modular microfluidic stabilizer system, which is fabricated using 3D printing and offers multi-level stabilization combinations and customizable stabilization ratios through the control of fluidic RC constants, making it adaptable to various microfluidic systems. A simplified three-element circuit model is used to characterize the system by straightforwardly extracting the RC constant without intricate calculations of the fluidic resistance and capacitance. By utilizing a simplified three-element model, the stabilizer yields two well-fitted operational curves, demonstrating an R-square of 0.95, and provides an optimal stabilization ratio below 1%. To evaluate the system’s effectiveness, unstable input flow at different working frequencies is stabilized, and droplet generation experiments are conducted and discussed. The results show that the microfluidic stabilizer system significantly reduces flow fluctuations and enhances droplet uniformity. This system provides a new avenue for microfluidic stabilization with a tunable stabilization ratio, and its plug-and-play design can be effectively applied across diverse applications to finely tune fluid flow behaviors in microfluidic devices.

Schlagwörter

Stichwörter der Autor:innen

3D printingdroplet generationfluidic circuit analogymodular microfluidic stabilizer systemtunable stabilization ratio

Autor:innen und Institutionen

  • Guangdong-Hong Kong-Macau Joint Laboratory on Micro-Nano Manufacturing Technology, Department of Materials Science and Engineering, Southern University of Science and Technology, No. 1088 Xueyuan Blvd., Shenzhen 518055,…
  • Department of Mechanical Engineering, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK.
  • Department of Materials Science and Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore.
  • Yangtze Delta Region Institute of Tsinghua University, 705 Yatai Road, Jiaxing 314006, China.

Förderung

  • National Natural Science Foundation of China
  • Guangdong-Hong Kong-Macau Joint Laboratory on Micro-Nano Manufacturing Technology
  • Shenzhen Science and Technology Innovation Committee for Talent Development

Zitieren

APA

Zhuge, W., Li, W., Wang, K., Chen, Z., Wu, C., Jiang, K., Ding, J., Anthony, C., & Cheng, X. (2024). A Lego-Like Reconfigurable Microfluidic Stabilizer System with Tunable Fluidic RC Constants and Stabilization Ratios. Micromachines, 15(7), 843. https://doi.org/10.3390/mi15070843

Vancouver

Zhuge W, Li W, Wang K, Chen Z, Wu C, Jiang K, et al. A Lego-Like Reconfigurable Microfluidic Stabilizer System with Tunable Fluidic RC Constants and Stabilization Ratios. Micromachines. 2024;15(7):843. doi:10.3390/mi15070843

BibTeX
@article{Zhuge2024,
  author = {Zhuge, Wuyang and Li, Weihao and Wang, Kaimin and Chen, Zhuodan and Wu, Chunhui and Jiang, Kyle and Ding, Jun and Anthony, Carl and Cheng, Xing},
  title = {A Lego-Like Reconfigurable Microfluidic Stabilizer System with Tunable Fluidic RC Constants and Stabilization Ratios},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {7},
  pages = {843},
  doi = {10.3390/mi15070843}
}
Kostenlos starten →