EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Filling Material Properties on 1-3 Piezoelectric Composite Performance

Yao Liu iD, Yang Zhou, Zhigang Zhao, Jinjie Zhou

Micromachines · 22.06.2024 · 15 (7) · 812

DOI: 10.3390/mi15070812 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 22.06.2024. Verfasst von Yao Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Shanxi Key Laboratory of Advanced Manufacturing Technology, North University of China, Taiyuan 030051, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanxi Key Laboratory of Advanced Manufacturing Technology, National Key R&D Program of China, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The 1-3 piezoelectric composite is the key component of the acoustic transducer, which is widely used in detection, due to the high energy conversion efficiency, cheap raw material, and low aging. To reveal the influence of epoxy mixture, used to connect the piezoelectric column, on the composite performance, a 1-3 piezoelectric composite model was built. The effects of mixture properties on the impedance curves, vibration mode, and deformation displacement of the composite were determined. Six 1-3 piezoelectric composites with different filling mixture properties, by changing the glass microspheres’ mass ratio in the epoxy, were prepared and measured to validate the model. The results showed that with the increase in the proportion of the glass microsphere in the epoxy mixture, the vibration coupling of the piezoelectric composites was gradually eliminated. The acoustic impedance was reduced by 12%. The electromechanical coupling coefficient and effective electromechanical coupling coefficient were increased by 5.4% and 8.3%, respectively. The density and Young’s modulus decrease in filling mixture can significantly improve piezoelectric composite performance.

Schlagwörter

Stichwörter der Autor:innen

acoustic impedancefilling epoxy mixturepiezoelectric compositevibration coupling

Autor:innen und Institutionen

  • Shanxi Key Laboratory of Advanced Manufacturing Technology, North University of China, Taiyuan 030051, China.

ORCID-Profile: Yao Liu

Förderung

  • Shanxi Key Laboratory of Advanced Manufacturing Technology
  • National Key R&D Program of China
  • National Key R&D Program of China
  • Supported by the Opening Project of Shanxi Key Laboratory of Advanced Manufacturing Technology

Zitieren

APA

Liu, Y., Zhou, Y., Zhao, Z., & Zhou, J. (2024). Effect of Filling Material Properties on 1-3 Piezoelectric Composite Performance. Micromachines, 15(7), 812. https://doi.org/10.3390/mi15070812

Vancouver

Liu Y, Zhou Y, Zhao Z, Zhou J. Effect of Filling Material Properties on 1-3 Piezoelectric Composite Performance. Micromachines. 2024;15(7):812. doi:10.3390/mi15070812

BibTeX
@article{Liu2024,
  author = {Liu, Yao and Zhou, Yang and Zhao, Zhigang and Zhou, Jinjie},
  title = {Effect of Filling Material Properties on 1-3 Piezoelectric Composite Performance},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {7},
  pages = {812},
  doi = {10.3390/mi15070812}
}
Kostenlos starten →