Rapid Fabrication of Tungsten Oxide-Based Electrochromic Devices through Femtosecond Laser Processing
Micromachines · 14.06.2024 · 15 (6) · 785
DOI: 10.3390/mi15060785 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 14.06.2024. Verfasst von Liqun Wang und 2 weiteren Autor:innen. Beteiligte Einrichtung: GPL Photonics Laboratory, State Key Laboratory of Luminescence Science and Technology, Changchun Institute of Optics, Fine Mechanics and Physics, Chi…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The sol-gel method is a widely adopted technique for the preparation of tungsten trioxide (WO3) materials, favored for its cost-effectiveness and straightforward production procedures. However, this method encounters challenges such as prolonged annealing periods and limited flexibility in fabricating patterned WO3 films. This study introduces a novel approach that integrates femtosecond laser processing with the sol-gel method to enhance the fabrication of WO3 films. By adjusting polyvinylpyrrolidone (PVP) concentrations during sol-gel synthesis, precise control over film thickness and optimized film properties were achieved. The innovative technique significantly reduced the annealing time required to achieve an 80% transmittance rate from 90 min to 40 min, marking a 56% decrease. Laser processing increased the surface roughness of the films from Sa = 0.032 to Sa = 0.119, facilitating enhanced volatilization of organics during heat treatment. Additionally, this method improved the transmittance modulation of the films by 22% at 550 nm compared to unprocessed counterparts. This approach not only simplifies the manufacturing process but also enhances the optical efficiency of electrochromic devices, potentially leading to broader applications and more effective energy conservation strategies.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- GPL Photonics Laboratory, State Key Laboratory of Luminescence Science and Technology, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China.
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.
ORCID-Profile: Longnan Li
Zitieren
APA
Wang, L., Zhai, Z., & Li, L. (2024). Rapid Fabrication of Tungsten Oxide-Based Electrochromic Devices through Femtosecond Laser Processing. Micromachines, 15(6), 785. https://doi.org/10.3390/mi15060785
Vancouver
Wang L, Zhai Z, Li L. Rapid Fabrication of Tungsten Oxide-Based Electrochromic Devices through Femtosecond Laser Processing. Micromachines. 2024;15(6):785. doi:10.3390/mi15060785
BibTeX
@article{Wang2024,
author = {Wang, Liqun and Zhai, Zihao and Li, Longnan},
title = {Rapid Fabrication of Tungsten Oxide-Based Electrochromic Devices through Femtosecond Laser Processing},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {6},
pages = {785},
doi = {10.3390/mi15060785}
}
EUVIMED