Characterization of Magnetorheological Impact Foams in Compression
Micromachines · 14.06.2024 · 15 (6) · 782
DOI: 10.3390/mi15060782 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 14.06.2024. Verfasst von Young Choi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace Engineering, University of Maryland, College Park, MD 20742, USA. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Clark School of Engineering at the University of Maryland.
Abstract (Originalsprache)
This study focuses on the development and compressive characteristics of magnetorheological elastomeric foam (MREF) as an adaptive cushioning material designed to protect payloads from a broader spectrum of impact loads. The MREF exhibits softness and flexibility under light compressive loads and low strains, yet it becomes rigid in response to higher impact loads and elevated strains. The synthesis of MREF involved suspending micron-sized carbonyl Fe particles in an uncured silicone elastomeric foam. A catalyzed addition crosslinking reaction, facilitated by platinum compounds, was employed to create the rapidly setting silicone foam at room temperature, simplifying the synthesis process. Isotropic MREF samples with varying Fe particle volume fractions (0%, 2.5%, 5%, 7.5%, and 10%) were prepared to assess the effect of particle concentrations. Quasi-static and dynamic compressive stress tests on the MREF samples placed between two multipole flexible strip magnets were conducted using an Instron servo-hydraulic test machine. The tests provided measurements of magnetic field-sensitive compressive properties, including compression stress, energy absorption capability, complex modulus, and equivalent viscous damping. Furthermore, the experimental investigation also explored the influence of magnet placement directions (0° and 90°) on the compressive properties of the MREFs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Aerospace Engineering, University of Maryland, College Park, MD 20742, USA.
ORCID-Profile: Young Choi, Norman M Wereley
Förderung
- Clark School of Engineering at the University of Maryland
Zitieren
APA
Choi, Y., & Wereley, N. M. (2024). Characterization of Magnetorheological Impact Foams in Compression. Micromachines, 15(6), 782. https://doi.org/10.3390/mi15060782
Vancouver
Choi Y, Wereley NM. Characterization of Magnetorheological Impact Foams in Compression. Micromachines. 2024;15(6):782. doi:10.3390/mi15060782
BibTeX
@article{Choi2024,
author = {Choi, Young and Wereley, Norman M},
title = {Characterization of Magnetorheological Impact Foams in Compression},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {6},
pages = {782},
doi = {10.3390/mi15060782}
}
EUVIMED