EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Digital Eddy Current Detection Method Based on High-Speed Sampling with STM32

Xiong Cao iD, Erlong Li, Zilan Yuan iD, Kaituo Zheng

Micromachines · 11.06.2024 · 15 (6) · 775

DOI: 10.3390/mi15060775 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 11.06.2024. Verfasst von Xiong Cao und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Sichuan University, Chengdu 610065, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China (Grant No.2022YFF0605600), Natural Science Foundation of China (Grant No.52377012), Natural Science Foundation of Sichuan (20…, National Key R&D Program of China, Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The electromagnetic eddy current non-destructive testing system enables the non-destructive analysis of surface defect information on tested materials. Based on the principles of eddy current detection, this paper presents a digital eddy current detection method using high-speed sampling based on STM32. A differential eddy current coil is used as the detection probe, and the combination of a differential bridge and a differential amplifier circuit helps to reduce common-mode noise interference. The detection signal is collected via an STM32-based acquisition circuit and transmitted to the host computer through Ethernet for digital demodulation processing. The host computer performs operations such as smoothing averaging, sinusoidal fitting, and outlier removal to extract the amplitude and phase of the detection signal. The system also visually displays the condition of the tested object’s surface in real time through graphical visualization. Testing showed that this system can operate at frequencies up to 8.84 MHz and clearly identify defects as narrow as 1 mm on the surface of the tested steel plate.

Schlagwörter

Stichwörter der Autor:innen

STM32 microcontrollerdigital demodulationeddy current detectionhigh-speed samplingsinusoidal fitting

Autor:innen und Institutionen

  • School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.

ORCID-Profile: Xiong Cao, Zilan Yuan

Förderung

  • National Key R&D Program of China (Grant No.2022YFF0605600), Natural Science Foundation of China (Grant No.52377012), Natural Science Foundation of Sichuan (20…
  • National Key R&D Program of China
  • Natural Science Foundation of China
  • Natural Science Foundation of Sichuan
  • Zigong Program of Sichuan University

Zitieren

APA

Cao, X., Li, E., Yuan, Z., & Zheng, K. (2024). Digital Eddy Current Detection Method Based on High-Speed Sampling with STM32. Micromachines, 15(6), 775. https://doi.org/10.3390/mi15060775

Vancouver

Cao X, Li E, Yuan Z, Zheng K. Digital Eddy Current Detection Method Based on High-Speed Sampling with STM32. Micromachines. 2024;15(6):775. doi:10.3390/mi15060775

BibTeX
@article{Cao2024,
  author = {Cao, Xiong and Li, Erlong and Yuan, Zilan and Zheng, Kaituo},
  title = {Digital Eddy Current Detection Method Based on High-Speed Sampling with STM32},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {6},
  pages = {775},
  doi = {10.3390/mi15060775}
}
Kostenlos starten →