EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Study of a Trapezoidal Rib and Fan Groove Microchannel Heat Sink

Lufan Jin, Junchao Wang, Yixun Cai, Guangzhao Yang, Xuebing Hua, Zhenggeng Zhong, Xiao Pan, Chengyu Cai, Jia Qin, Mingxuan Cao

Micromachines · 28.05.2024 · 15 (6) · 713

DOI: 10.3390/mi15060713 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 28.05.2024. Verfasst von Lufan Jin und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Optoelectronic Manufacturing, Zhejiang Industry and Trade Vocational College, Wenzhou 325003, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Provincial Natural Science Foundation of China, the Key Scientific and Technological Projects of Wenzhou City, Key Scientific and Technological Projects of Wenzhou City.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel microchannel heat sink (TFMCHS) with trapezoidal ribs and fan grooves was proposed, and the microchannel was manufactured using selective laser melting technology. Firstly, the temperature and pressure drop at different power levels were measured through experiments and then combined with numerical simulation to explore the complex flow characteristics within TFMCHSs and evaluate the comprehensive performance of microchannel heat sinks based on the thermal enhancement coefficient. The results show that, compared with rectangular microchannel heat sinks (RMCHSs), the average and maximum temperatures of TFMCHSs are significantly reduced, and the temperature distribution is more uniform. This is mainly caused by the periodic interruption and redevelopment of the velocity boundary layer and thermal boundary layer caused by ribs and grooves. And as the heating power increases, the TFMCHS has better heat dissipation performance. When P=33 W and the inlet flow rate is 32.5 mL/min, the thermal enhancement factor reaches 1.26.

Schlagwörter

Stichwörter der Autor:innen

experimentsfan groovesnumerical simulationthermal enhancement factortrapezoidal ribs

Autor:innen und Institutionen

  • College of Optoelectronic Manufacturing, Zhejiang Industry and Trade Vocational College, Wenzhou 325003, China.
  • Institute of Laser and Opto-Electronics, School of Precision Instruments and Opto-Eletronics Engineering, Tianjin University, Tianjin 300072, China.
  • Penta Laser (Zhejiang) Co., Ltd., Wenzhou 325000, China.
  • School of Mechanical and Automation Engineering, Wuyi University, Jiangmen 529020, China.

Förderung

  • Zhejiang Provincial Natural Science Foundation of China
  • the Key Scientific and Technological Projects of Wenzhou City
  • Key Scientific and Technological Projects of Wenzhou City

Zitieren

APA

Jin, L., Wang, J., Cai, Y., Yang, G., Hua, X., Zhong, Z., Pan, X., Cai, C., Qin, J., & Cao, M. (2024). Experimental and Numerical Study of a Trapezoidal Rib and Fan Groove Microchannel Heat Sink. Micromachines, 15(6), 713. https://doi.org/10.3390/mi15060713

Vancouver

Jin L, Wang J, Cai Y, Yang G, Hua X, Zhong Z, et al. Experimental and Numerical Study of a Trapezoidal Rib and Fan Groove Microchannel Heat Sink. Micromachines. 2024;15(6):713. doi:10.3390/mi15060713

BibTeX
@article{Jin2024,
  author = {Jin, Lufan and Wang, Junchao and Cai, Yixun and Yang, Guangzhao and Hua, Xuebing and Zhong, Zhenggeng and Pan, Xiao and Cai, Chengyu and Qin, Jia and Cao, Mingxuan},
  title = {Experimental and Numerical Study of a Trapezoidal Rib and Fan Groove Microchannel Heat Sink},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {6},
  pages = {713},
  doi = {10.3390/mi15060713}
}
Kostenlos starten →