EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces

Zhaohao He, Kuo Hai, Kailong Li, Jiahao Yu, Lingwei Wu, Lin Zhang, Xing Su, Lisheng Cai, Wen Huang, Wei Hang iD

Micromachines · 15.05.2024 · 15 (5) · 654

DOI: 10.3390/mi15050654 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 15.05.2024. Verfasst von Zhaohao He und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National key research and development program of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Elastic spherical polishing tools effectively conform to the polishing surface and exhibit high efficiency in the removal of materials, so they are extensively used in the sub-aperture polishing stages of optical components. However, their processing is often accompanied by significant mid-spatial frequency (MSF) errors, which critically degrade the performance of optical systems. To suppress the MSF errors generated during polishing with spherical tools, this study investigates the influence factor of MSF errors during the polishing process through an analysis of the convolution effect in material removal. A material removal profile model is established, and a uniform removal simulation is conducted to assess the influence of different shape material removal profiles on MSF errors. Simulation and experimental results show that a Gaussian-like shape material removal profile is more effective in suppressing the MSF errors during polishing compared to the “W” and trapezoidal shape material removal profiles. In addition, based on the characteristics of the RMS decreasing in a serrated trend with the decrease in path spacing, a path spacing optimization method considering the polishing efficiency is proposed to improve the polishing efficiency while controlling the MSF errors, and the effectiveness of the path spacing optimization method is verified by comparing the MSF error at the maximum theoretical path spacing and the path spacing that is less than this. Finally, the path spacing optimization method is used to polish single-crystal silicon to further illustrate its practicality.

Schlagwörter

Stichwörter der Autor:innen

convolution effectmaterial removal profilemid-spatial frequency errorsub-aperture polishing

Autor:innen und Institutionen

  • College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China.
  • Sichuan Precision and Ultra-Precision Machining Engineering Technology Center, Chengdu 610200, China.
  • Key Laboratory of Advanced Ceramics and Machining Technology, Ministry of Education, Tianjin University, Tianjin 300072, China.
  • School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China.

ORCID-Profile: Wei Hang

Förderung

  • National key research and development program of China
  • National Natural Science Foundation of China

Zitieren

APA

He, Z., Hai, K., Li, K., Yu, J., Wu, L., Zhang, L., Su, X., Cai, L., Huang, W., & Hang, W. (2024). Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces. Micromachines, 15(5), 654. https://doi.org/10.3390/mi15050654

Vancouver

He Z, Hai K, Li K, Yu J, Wu L, Zhang L, et al. Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces. Micromachines. 2024;15(5):654. doi:10.3390/mi15050654

BibTeX
@article{He2024,
  author = {He, Zhaohao and Hai, Kuo and Li, Kailong and Yu, Jiahao and Wu, Lingwei and Zhang, Lin and Su, Xing and Cai, Lisheng and Huang, Wen and Hang, Wei},
  title = {Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {5},
  pages = {654},
  doi = {10.3390/mi15050654}
}
Kostenlos starten →