Development of Wearable Textile MIMO Antenna for Sub-6 GHz Band New Radio 5G Applications
Micromachines · 15.05.2024 · 15 (5) · 651
DOI: 10.3390/mi15050651 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 15.05.2024. Verfasst von Pendli Pradeep und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronics and Communication Engineering, Sreenidhi Institute of Science and Technology (Autonomous), Hyderabad 501301, India. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Khalid University under Large Group Research Project grant number RGP 2/386/45, Deanship of Research and Graduate Studies of King Khalid University.
Abstract (Originalsprache)
In this paper, an irregular octagonal two-port MIMO patch antenna is designed specifically for New Radio (NR) 5G applications in the mid-band sub-6 GHz. The proposed antenna comprises an irregularly shaped patch antenna equipped with a regular 50-ohm feed line and a parasitic strip line antenna, and is partially grounded. Jeans material serves as a substrate with an effective dielectric constant of 1.6 and a thickness of 1 mm. This material is studied experimentally. The proposed antenna design undergoes analysis and optimization using the ANSYS HFSS tool. Furthermore, the design incorporates the influence of the slot on both the ground plane and the parasitic strip line to optimize performance, enhance isolation, and improve impedance matching among antenna elements. The dimensions of the jeans substrate are 40 mm × 50 mm. The simulated impedance bandwidth ranged from 3.6 GHz to 7 GHz and the measured bandwidth was slightly narrower, from 4.35 GHz to 7 GHz. The simulation results demonstrated an isolation level greater than 12 dB between antenna elements, while the measured results reached 28.5 dB, and the peak gain for this proposed antenna stood at 6.74 dB. These qualities made this proposed antenna suitable for various New Radio mid-band 5G wireless applications within the sub-6 GHz band, such as N79, Wi-Fi-5/6, V2X, and DSRC applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electronics and Communication Engineering, Sreenidhi Institute of Science and Technology (Autonomous), Hyderabad 501301, India.
- Department of Electronics and Communication Engineering, Lakireddy Bali Reddy College of Engineering, N T R Dt., Mylavaram 521230, India.
- Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia.
- Center for Engineering and Technology Innovation (CETI), College of Engineering, King Khalid University, Abha 61421, Saudi Arabia.
ORCID-Profile: Pendli Pradeep, Mohammed Mahaboob Basha, Srinivasulu Gundala, Javed Syed
Förderung
- King Khalid University under Large Group Research Project grant number RGP 2/386/45
- Deanship of Research and Graduate Studies of King Khalid University
Zitieren
APA
Pradeep, P., Basha, M. M., Gundala, S., & Syed, J. (2024). Development of Wearable Textile MIMO Antenna for Sub-6 GHz Band New Radio 5G Applications. Micromachines, 15(5), 651. https://doi.org/10.3390/mi15050651
Vancouver
Pradeep P, Basha MM, Gundala S, Syed J. Development of Wearable Textile MIMO Antenna for Sub-6 GHz Band New Radio 5G Applications. Micromachines. 2024;15(5):651. doi:10.3390/mi15050651
BibTeX
@article{Pradeep2024,
author = {Pradeep, Pendli and Basha, Mohammed Mahaboob and Gundala, Srinivasulu and Syed, Javed},
title = {Development of Wearable Textile MIMO Antenna for Sub-6 GHz Band New Radio 5G Applications},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {5},
pages = {651},
doi = {10.3390/mi15050651}
}
EUVIMED