EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Simulation Research on Femtosecond Laser Induced Controllable Morphology of Monocrystalline SiC

Yang Hua, Zhenduo Zhang, Jiyu Du iD, Xiaoliang Liang, Wei Zhang, Yukui Cai, Quanjing Wang

Micromachines · 26.04.2024 · 15 (5) · 573

DOI: 10.3390/mi15050573 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 26.04.2024. Verfasst von Yang Hua und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electronic Engineering, Shandong Jianzhu University, Jinan 250101, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China, Natural Science Foundation of Shandong province, National College Student Innovation Training Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon carbide (SiC) is utilized in the automotive, semiconductor, and aerospace industries because of its desirable characteristics. Nevertheless, the traditional machining method induces surface microcracks, low geometrical precision, and severe tool wear due to the intrinsic high brittleness and hardness of SiC. Femtosecond laser processing as a high-precision machining method offers a new approach to SiC processing. However, during the process of femtosecond laser ablation, temperature redistribution and changes in geometrical morphology features are caused by alterations in carrier density. Therefore, the current study presented a multi-physics model that took carrier density alterations into account to more accurately predict the geometrical morphology for femtosecond laser ablating SiC. The transient nonlinear evolutions of the optical and physical characteristics of SiC irradiated by femtosecond laser were analyzed and the influence of laser parameters on the ablation morphology was studied. The femtosecond laser ablation experiments were performed, and the ablated surfaces were subsequently analyzed. The experimental results demonstrate that the proposed model can effectively predict the geometrical morphology. The predicted error of the ablation diameter is within the range from 0.15% to 7.44%. The predicted error of the ablation depth is within the range from 1.72% to 6.94%. This work can offer a new way to control the desired geometrical morphology of SiC in the automotive, semiconductor, and aerospace industries.

Schlagwörter

Stichwörter der Autor:innen

SiCcarrier densitycontrollable morphologyfemtosecond lasermulti-physics model

Autor:innen und Institutionen

  • School of Mechanical and Electronic Engineering, Shandong Jianzhu University, Jinan 250101, China.
  • Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China.
  • School of Mechanical Engineering, Shandong University, Jinan 250061, China.

ORCID-Profile: Jiyu Du

Förderung

  • Natural Science Foundation of China
  • Natural Science Foundation of Shandong province
  • National College Student Innovation Training Program

Zitieren

APA

Hua, Y., Zhang, Z., Du, J., Liang, X., Zhang, W., Cai, Y., & Wang, Q. (2024). Experimental and Simulation Research on Femtosecond Laser Induced Controllable Morphology of Monocrystalline SiC. Micromachines, 15(5), 573. https://doi.org/10.3390/mi15050573

Vancouver

Hua Y, Zhang Z, Du J, Liang X, Zhang W, Cai Y, et al. Experimental and Simulation Research on Femtosecond Laser Induced Controllable Morphology of Monocrystalline SiC. Micromachines. 2024;15(5):573. doi:10.3390/mi15050573

BibTeX
@article{Hua2024,
  author = {Hua, Yang and Zhang, Zhenduo and Du, Jiyu and Liang, Xiaoliang and Zhang, Wei and Cai, Yukui and Wang, Quanjing},
  title = {Experimental and Simulation Research on Femtosecond Laser Induced Controllable Morphology of Monocrystalline SiC},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {5},
  pages = {573},
  doi = {10.3390/mi15050573}
}
Kostenlos starten →