EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electromagnetic Acoustic Detection of Pipe Defects Hidden above T-Type Support Structures with Circumferential Shear Horizontal Guided Wave

Xingjun Zhang, Jinjie Zhou, Yang Hu, Yao Liu, Xingquan Shen

Micromachines · 20.04.2024 · 15 (4) · 550

DOI: 10.3390/mi15040550 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.04.2024. Verfasst von Xingjun Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, North University of China, Taiyuan 030051, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

When pipe defects are generated above the T-type support structure location, it is difficult to distinguish the reflection signals caused by the weld bead at the support structure from the reflection echoes of pipe defects. Therefore, in order to effectively detect pipe defects, a waveform subtraction method with a circumferential shear horizontal (CSH) guided wave is proposed, which is generated by an electromagnetic acoustic transducer (EMAT). First, a CSH0 guided wave mode with a center frequency of 500 kHz is selected to establish a three-dimensional model with and without pipe defects above the support structure. Following this, the influence of different widths of support structures on the echo signal is compared. Moreover, simulation and experimental results are used to compare the influence of different welding qualities on the detection results. Finally, the waveform subtraction method is used to process the simulation and experimental signals, and the influence of pipe defects with different lengths and depths is discussed. The results show that the non-through crack defect of 5 mm × 1 mm (length × depth) can be detected. The results show that this method can effectively detect the cracks by eliminating the influence of the weld echo, which provides a new concept for the detection of the defect above the support structure.

Schlagwörter

Stichwörter der Autor:innen

EMATdefect detectionpipeline support structureshear horizontalwaveform subtraction

Autor:innen und Institutionen

  • School of Mechanical Engineering, North University of China, Taiyuan 030051, China.
  • Shanxi Key Laboratory of Intelligent Equipment Technology in Harsh Environment, Taiyuan 030051, China.

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Zhang, X., Zhou, J., Hu, Y., Liu, Y., & Shen, X. (2024). Electromagnetic Acoustic Detection of Pipe Defects Hidden above T-Type Support Structures with Circumferential Shear Horizontal Guided Wave. Micromachines, 15(4), 550. https://doi.org/10.3390/mi15040550

Vancouver

Zhang X, Zhou J, Hu Y, Liu Y, Shen X. Electromagnetic Acoustic Detection of Pipe Defects Hidden above T-Type Support Structures with Circumferential Shear Horizontal Guided Wave. Micromachines. 2024;15(4):550. doi:10.3390/mi15040550

BibTeX
@article{Zhang2024,
  author = {Zhang, Xingjun and Zhou, Jinjie and Hu, Yang and Liu, Yao and Shen, Xingquan},
  title = {Electromagnetic Acoustic Detection of Pipe Defects Hidden above T-Type Support Structures with Circumferential Shear Horizontal Guided Wave},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {4},
  pages = {550},
  doi = {10.3390/mi15040550}
}
Kostenlos starten →