Optimization of Graphical Parameter Extraction Algorithm for Chip-Level CMP Prediction Model Based on Effective Planarization Length
Micromachines · 19.04.2024 · 15 (4) · 549
DOI: 10.3390/mi15040549 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 19.04.2024. Verfasst von Bowen Ren und 4 weiteren Autor:innen. Beteiligte Einrichtung: The EDA Center, Institute of Microelectronics of Chinese Academy of Sciences, Beijing 100029, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Foundation for Research on intelligent EDA tool for CMP process simulation of IC wafer manufacturing.
Abstract (Originalsprache)
As a planarization technique, chemical mechanical polishing (CMP) continues to suffer from pattern effects that result in large variations in material thickness, which can influence circuit performance and yield. Therefore, tools for predicting post-CMP chip morphology based on the layout-dependent effect (LDE) have become increasingly critical and widely utilized for design verification and manufacturing development. In order to characterize the impact of patterns on polishing, such models often require the extraction of graphic parameters. However, existing extraction algorithms provide a limited description of the interaction effect between layout patterns. To address this problem, we calculate the average density as a density correction and innovatively use a one-dimensional line contact deformation profile as a weighting function. To verify our hypothesis, the density correction method is applied to a density step-height-based high-K metal gate-CMP prediction model. The surface prediction results before and after optimization are compared with the silicon data. The results show a reduction in mean squared error (MSE) of 40.1% and 35.2% in oxide and Al height predictions, respectively, compared with the preoptimization results, confirming that the optimization method can improve the prediction accuracy of the model.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- The EDA Center, Institute of Microelectronics of Chinese Academy of Sciences, Beijing 100029, China.
- The School of Electronic, Electrical and Communication Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.
Förderung
- Foundation for Research on intelligent EDA tool for CMP process simulation of IC wafer manufacturing
Zitieren
APA
Ren, B., Chen, L., Chen, R., Sun, Y., & Wang, Y. (2024). Optimization of Graphical Parameter Extraction Algorithm for Chip-Level CMP Prediction Model Based on Effective Planarization Length. Micromachines, 15(4), 549. https://doi.org/10.3390/mi15040549
Vancouver
Ren B, Chen L, Chen R, Sun Y, Wang Y. Optimization of Graphical Parameter Extraction Algorithm for Chip-Level CMP Prediction Model Based on Effective Planarization Length. Micromachines. 2024;15(4):549. doi:10.3390/mi15040549
BibTeX
@article{Ren2024,
author = {Ren, Bowen and Chen, Lan and Chen, Rong and Sun, Yan and Wang, Yali},
title = {Optimization of Graphical Parameter Extraction Algorithm for Chip-Level CMP Prediction Model Based on Effective Planarization Length},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {4},
pages = {549},
doi = {10.3390/mi15040549}
}
EUVIMED