EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Coaxial 3D Bioprinting Process Research and Performance Tests on Vascular Scaffolds

Jiarun Sun, Youping Gong iD, Manli Xu, Huipeng Chen, Huifeng Shao, Rougang Zhou

Micromachines · 29.03.2024 · 15 (4) · 463

DOI: 10.3390/mi15040463 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 29.03.2024. Verfasst von Jiarun Sun und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems, Basic scientific research project of provincial universities of Hangzhou Dianzi University, Zhejiang Provincial Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensionally printed vascularized tissue, which is suitable for treating human cardiovascular diseases, should possess excellent biocompatibility, mechanical performance, and the structure of complex vascular networks. In this paper, we propose a method for fabricating vascularized tissue based on coaxial 3D bioprinting technology combined with the mold method. Sodium alginate (SA) solution was chosen as the bioink material, while the cross-linking agent was a calcium chloride (CaCl2) solution. To obtain the optimal parameters for the fabrication of vascular scaffolds, we first formulated theoretical models of a coaxial jet and a vascular network. Subsequently, we conducted a simulation analysis to obtain preliminary process parameters. Based on the aforementioned research, experiments of vascular scaffold fabrication based on the coaxial jet model and experiments of vascular network fabrication were carried out. Finally, we optimized various parameters, such as the flow rate of internal and external solutions, bioink concentration, and cross-linking agent concentration. The performance tests showed that the fabricated vascular scaffolds had levels of satisfactory degradability, water absorption, and mechanical properties that meet the requirements for practical applications. Cellular experiments with stained samples demonstrated satisfactory proliferation of human umbilical vein endothelial cells (HUVECs) within the vascular scaffold over a seven-day period, observed under a fluorescent inverted microscope. The cells showed good biocompatibility with the vascular scaffold. The above results indicate that the fabricated vascular structure initially meet the requirements of vascular scaffolds.

Schlagwörter

Stichwörter der Autor:innen

3D bioprintingbiological scaffoldcoaxial jetfinite element analysisvascular network

Autor:innen und Institutionen

  • School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China.
  • State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China.
  • The 2nd Affiliated Hospital of Zhejiang Chinese Medical University, Hangzhou 310005, China.
  • Jiangsu Key Laboratory of 3D Printing Equipment and Manufacturing, Nanjing Normal University, Nanjing 210042, China.
  • Mstar Technologies, Inc., Room 406, Building 19, Hangzhou Future Science and Technology City (Haichuang Park), No. 998, Wenyi West Road, Yuhang District, Hangzhou 311121, China.

ORCID-Profile: Youping Gong

Förderung

  • Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems
  • Basic scientific research project of provincial universities of Hangzhou Dianzi University
  • Zhejiang Provincial Natural Science Foundation of China
  • Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems, Jiangsu Key Laboratory of 3D Printing Equipment and Manufacturing

Zitieren

APA

Sun, J., Gong, Y., Xu, M., Chen, H., Shao, H., & Zhou, R. (2024). Coaxial 3D Bioprinting Process Research and Performance Tests on Vascular Scaffolds. Micromachines, 15(4), 463. https://doi.org/10.3390/mi15040463

Vancouver

Sun J, Gong Y, Xu M, Chen H, Shao H, Zhou R. Coaxial 3D Bioprinting Process Research and Performance Tests on Vascular Scaffolds. Micromachines. 2024;15(4):463. doi:10.3390/mi15040463

BibTeX
@article{Sun2024,
  author = {Sun, Jiarun and Gong, Youping and Xu, Manli and Chen, Huipeng and Shao, Huifeng and Zhou, Rougang},
  title = {Coaxial 3D Bioprinting Process Research and Performance Tests on Vascular Scaffolds},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {4},
  pages = {463},
  doi = {10.3390/mi15040463}
}
Kostenlos starten →