Parallel Grooved Microstructure Manufacturing on the Surface of Si3N4 Ceramics by Femtosecond Laser
Micromachines · 14.03.2024 · 15 (3) · 394
DOI: 10.3390/mi15030394 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 14.03.2024. Verfasst von Xufeng Wen und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shanghai.
Abstract (Originalsprache)
Machining special microstructures on the surface of silicon nitride ceramics helps improve their service performance. However, the high brittleness and low fracture toughness of silicon nitride ceramics make it extremely difficult to machine microstructures on their surface. In this study, a femtosecond laser is used to machine parallel grooved microstructures on the surface of silicon nitride ceramics. The effects of the laser polarization angle, laser single pulse energy, scanning line spacing, and laser scan numbers on the surface morphology and geometric characteristics of grooved microstructures are researched. It is found that a greater angle between the direction of the scanning path and laser polarization is helpful to obtain a smoother surface. As the single pulse energy increases, debris and irregular surface structures will emerge. Increasing the laser scan line spacing leads to clearer and more defined parallel grooved microstructures. The groove depth increases with the increase in the scan numbers. However, when a certain number of scans is reached, the depth will not increase further. This study serves as a valuable research foundation for the femtosecond laser processing of silicon nitride ceramic materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
Förderung
- Natural Science Foundation of Shanghai
Zitieren
APA
Wen, X., Gao, Y., Zhang, H., & Yang, Y. (2024). Parallel Grooved Microstructure Manufacturing on the Surface of Si3N4 Ceramics by Femtosecond Laser. Micromachines, 15(3), 394. https://doi.org/10.3390/mi15030394
Vancouver
Wen X, Gao Y, Zhang H, Yang Y. Parallel Grooved Microstructure Manufacturing on the Surface of Si3N4 Ceramics by Femtosecond Laser. Micromachines. 2024;15(3):394. doi:10.3390/mi15030394
BibTeX
@article{Wen2024,
author = {Wen, Xufeng and Gao, Yanfeng and Zhang, Hua and Yang, Yaxin},
title = {Parallel Grooved Microstructure Manufacturing on the Surface of Si3N4 Ceramics by Femtosecond Laser},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {3},
pages = {394},
doi = {10.3390/mi15030394}
}
EUVIMED