EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Recent Progress in Droplet Structure Machining for Advanced Optics

Jin-Kun Guo iD, W D N Sandaruwan, Jinwei Li, Jinzhong Ling, Ying Yuan, Xin Liu, Qiang Li, Xiaorui Wang

Micromachines · 28.02.2024 · 15 (3) · 337

DOI: 10.3390/mi15030337 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 28.02.2024. Verfasst von Jin-Kun Guo und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Optoelectronic Engineering, Xidian University, Xi'an 710071, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 110 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Research and Development Program of Shaanxi, Seed Funds for Internationalization of Xidian University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of optical and photonic applications using soft-matter droplets holds great scientific and application importance. The machining of droplet structures is expected to drive breakthroughs in advancing frontier applications. This review highlights recent advancements in micro–nanofabrication techniques for soft-matter droplets, encompassing microfluidics, laser injection, and microfluidic 3D printing. The principles, advantages, and weaknesses of these technologies are thoroughly discussed. The review introduces the utilization of a phase separation strategy in microfluidics to assemble complex emulsion droplets and control droplet geometries by adjusting interfacial tension. Additionally, laser injection can take full advantage of the self-assembly properties of soft matter to control the spontaneous organization of internal substructures within droplets, thus providing the possibility of high-precision customized assembly of droplets. Microfluidic 3D printing demonstrates a 3D printing-based method for machining droplet structures. Its programmable nature holds promise for developing device-level applications utilizing droplet arrays. Finally, the review presents novel applications of soft-matter droplets in optics and photonics. The integration of processing concepts from microfluidics, laser micro–nano-machining, and 3D printing into droplet processing, combined with the self-assembly properties of soft materials, may offer novel opportunities for processing and application development.

Schlagwörter

Stichwörter der Autor:innen

3D printingdropletemulsionslab on a chiplaser injectionlaser micro–nano-machiningliquid crystalmicrofabricationmicrofluidicssoft matter

Autor:innen und Institutionen

  • School of Optoelectronic Engineering, Xidian University, Xi'an 710071, China.

ORCID-Profile: Jin-Kun Guo

Förderung

  • National Natural Science Foundation of China
  • Key Research and Development Program of Shaanxi
  • Seed Funds for Internationalization of Xidian University
  • Natural Science Basic Research Program of Shaanxi Province
  • Key Scientific Research Program of Shaanxi Provincial Department of Education

Zitieren

APA

Guo, J. K., Sandaruwan, W. D. N., Li, J., Ling, J., Yuan, Y., Liu, X., Li, Q., & Wang, X. (2024). Recent Progress in Droplet Structure Machining for Advanced Optics. Micromachines, 15(3), 337. https://doi.org/10.3390/mi15030337

Vancouver

Guo JK, Sandaruwan WDN, Li J, Ling J, Yuan Y, Liu X, et al. Recent Progress in Droplet Structure Machining for Advanced Optics. Micromachines. 2024;15(3):337. doi:10.3390/mi15030337

BibTeX
@article{Guo2024,
  author = {Guo, Jin-Kun and Sandaruwan, W D N and Li, Jinwei and Ling, Jinzhong and Yuan, Ying and Liu, Xin and Li, Qiang and Wang, Xiaorui},
  title = {Recent Progress in Droplet Structure Machining for Advanced Optics},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {3},
  pages = {337},
  doi = {10.3390/mi15030337}
}
Kostenlos starten →