EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effects of Etchant on via Hole Taper Angle and Selectivity in Selective Laser Etching

Jonghyeok Kim iD, Byungjoo Kim iD, Jiyeon Choi iD, Sanghoon Ahn iD

Micromachines · 25.02.2024 · 15 (3) · 320

DOI: 10.3390/mi15030320 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 25.02.2024. Verfasst von Jonghyeok Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Laser & Electron Beam Technologies, Korea Institute of Machinery & Materials, 156 Gajeongbuk-Ro, Yuseong-Gu, Daejeon 34103, Republic of…. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute for Advancement of Technology, Korea Institute of Machinery and Materials, Ministry of Trade, Industry and Energy (MOTIE, Korea).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research focuses on the manufacturing of a glass interposer that has gone through glass via (TGV) connection holes. Glass has unique properties that make it suitable for 3D integrated circuit (IC) interposers, which include low permittivity, high transparency, and adjustable thermal expansion coefficient. To date, various studies have suggested numerous techniques to generate holes in glass. In this study, we adopt the selective laser etching (SLE) technique. SLE consists of two processes: local modification via an ultrashort pulsed laser and chemical etching. In our previous study, we found that the process speed can be enhanced by changing the local modification method. For further enhancement in the process speed, in this study, we focus on the chemical etching process. In particular, we try to find a proper etchant for TGV formation. Here, four different etchants (HF, KOH, NaOH, and NH4F) are compared in order to improve the etching speed. For a quantitative comparison, we adopt the concept of selectivity. The results show that NH4F has the highest selectivity; therefore, we can tentatively claim that it is a promising candidate etchant for generating TGV. In addition, we also observe a taper angle variation according to the etchant used. The results show that the taper angle of the hole is dependent on the concentration of the etchant as well as the etchant itself. These results may be applicable to various industrial fields that aim to adjust the taper angle of holes.

Schlagwörter

Stichwörter der Autor:innen

chemical etchingselective laser etchingselectivitytaper angleultrashort pulsed laser

Autor:innen und Institutionen

  • Department of Laser & Electron Beam Technologies, Korea Institute of Machinery & Materials, 156 Gajeongbuk-Ro, Yuseong-Gu, Daejeon 34103, Republic of Korea.
  • Department of Mechanical Engineering (Robot∙Manufacturing Systems), University of Science and Technology, 217 Gajeong-Ro, Yuseong-Gu, Daejeon 34113, Republic of Korea.

ORCID-Profile: Jonghyeok Kim, Byungjoo Kim, Jiyeon Choi, Sanghoon Ahn

Förderung

  • Korea Institute for Advancement of Technology
  • Korea Institute of Machinery and Materials
  • Ministry of Trade, Industry and Energy (MOTIE, Korea)
  • Basic Research Fund of Korea Institute of Machinery and Materials

Zitieren

APA

Kim, J., Kim, B., Choi, J., & Ahn, S. (2024). The Effects of Etchant on via Hole Taper Angle and Selectivity in Selective Laser Etching. Micromachines, 15(3), 320. https://doi.org/10.3390/mi15030320

Vancouver

Kim J, Kim B, Choi J, Ahn S. The Effects of Etchant on via Hole Taper Angle and Selectivity in Selective Laser Etching. Micromachines. 2024;15(3):320. doi:10.3390/mi15030320

BibTeX
@article{Kim2024,
  author = {Kim, Jonghyeok and Kim, Byungjoo and Choi, Jiyeon and Ahn, Sanghoon},
  title = {The Effects of Etchant on via Hole Taper Angle and Selectivity in Selective Laser Etching},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {3},
  pages = {320},
  doi = {10.3390/mi15030320}
}
Kostenlos starten →