Gradient-Pattern Micro-Grooved Wicks Fabricated by the Ultraviolet Nanosecond Laser Method and Their Enhanced Capillary Performance
Micromachines · 22.01.2024 · 15 (1) · 165
DOI: 10.3390/mi15010165 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 22.01.2024. Verfasst von Guanghan Huang und 8 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology, Guangzhou 510006, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Program of Guangdong Province, Guangzhou Basic and Applied Basic Research Project, National Natural Science Foundation of China.
Abstract (Originalsprache)
Capillary-gradient wicks can achieve fast or directional liquid transport, but they face fabrication challenges by traditional methods in terms of precise patterns. Laser processing is a potential solution due to its high pattern accuracy, but there are a few studies on laser-processed capillary-gradient wicks. In this paper, capillary step-gradient micro-grooved wicks (CSMWs) were fabricated by an ultraviolet nanosecond pulsed laser, and their capillary performance was studied experimentally. The CSMWs could be divided into three regions with a decreasing capillary radius. The equilibrium rising height of the CSMWs was enhanced by 124% compared to the non-gradient parallel wick. Different from the classical Lucas–Washburn model describing a uniform non-gradient wick, secondary capillary acceleration was observed in the negative gradient direction of the CSMWs. With the increase in laser power and the decrease in scanning speed, the capillary performance was promoted, and the optimal laser processing parameters were 4 W-10 mm/s. The laser-enhanced capillary performance was attributed to the improved hydrophilicity and reduced capillary radius, which resulted from the increased surface roughness, protrusion morphology, and deep-narrow V-shaped grooves induced by the high energy density of the laser. Our study demonstrates that ultraviolet pulsed laser processing is a highly efficient and low-cost method for fabricating high-performance capillary gradient wicks.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology, Guangzhou 510006, China.
- State Key Laboratory of Advanced Materials and Electronic Components, Fenghua Advanced Technology Co., Ltd., Zhaoqing 526020, China.
ORCID-Profile: Guanghan Huang, Guannan Yang
Förderung
- Science and Technology Program of Guangdong Province
- Guangzhou Basic and Applied Basic Research Project
- National Natural Science Foundation of China
- The State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment
- State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment
Zitieren
APA
Huang, G., Liao, J., Fan, C., Liu, S., Miao, W., Zhang, Y., Ta, S., Yang, G., & Cui, C. (2024). Gradient-Pattern Micro-Grooved Wicks Fabricated by the Ultraviolet Nanosecond Laser Method and Their Enhanced Capillary Performance. Micromachines, 15(1), 165. https://doi.org/10.3390/mi15010165
Vancouver
Huang G, Liao J, Fan C, Liu S, Miao W, Zhang Y, et al. Gradient-Pattern Micro-Grooved Wicks Fabricated by the Ultraviolet Nanosecond Laser Method and Their Enhanced Capillary Performance. Micromachines. 2024;15(1):165. doi:10.3390/mi15010165
BibTeX
@article{Huang2024,
author = {Huang, Guanghan and Liao, Jiawei and Fan, Chao and Liu, Shuang and Miao, Wenjie and Zhang, Yu and Ta, Shiwo and Yang, Guannan and Cui, Chengqiang},
title = {Gradient-Pattern Micro-Grooved Wicks Fabricated by the Ultraviolet Nanosecond Laser Method and Their Enhanced Capillary Performance},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {1},
pages = {165},
doi = {10.3390/mi15010165}
}
EUVIMED