EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Implementation of Highly Reliable Contacts for RF MEMS Switches

Lili Jiang, Lifeng Wang iD, Xiaodong Huang, Zhen Huang, Min Huang

Micromachines · 20.01.2024 · 15 (1) · 155

DOI: 10.3390/mi15010155 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.01.2024. Verfasst von Lili Jiang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of MEMS of the Ministry of Education, School of Electronic Science and Engineering, Southeast University, Nanjing 210096, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key R&D Program of China, the National Natural Science Foundation of China, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A contact is the key structure of RF MEMS (Radio Frequency Microelectromechanical System) switches, which has a direct impact on the switch’s electrical and mechanical properties. In this paper, the implementation of highly reliable contacts for direct-contact RF MEMS switches is provided. As a soft metal material, gold has the advantages of low contact resistance, high chemical stability, and mature process preparation, so it is chosen as the metal material for the beam structure as well as the contacts of the switch. However, a Pt film is used in the bottom contact area to enhance the reliability of the contact. Three kinds of contacts with various shapes are fabricated using different processes. Particularly, a circular-shaped contact is obtained by dry/wet combined processes. The detailed fabrication process of the contacts as well as the Pt film on the bottom contact area are given. The experimental test shows that the contact shape has little effect on the RF performance of the switches. However, the circular contact shows better reliability than other contacts and can work well even after 1.2 × 109 cycles.

Schlagwörter

Stichwörter der Autor:innen

RF MEMS switchhighly reliable contactslifetimeshape of contacts

Autor:innen und Institutionen

  • Key Laboratory of MEMS of the Ministry of Education, School of Electronic Science and Engineering, Southeast University, Nanjing 210096, China.
  • Nanjing Electronic Devices Institute, Nanjing 210016, China.

ORCID-Profile: Lifeng Wang

Förderung

  • the National Key R&D Program of China
  • the National Natural Science Foundation of China
  • National Key R&D Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Jiang, L., Wang, L., Huang, X., Huang, Z., & Huang, M. (2024). Implementation of Highly Reliable Contacts for RF MEMS Switches. Micromachines, 15(1), 155. https://doi.org/10.3390/mi15010155

Vancouver

Jiang L, Wang L, Huang X, Huang Z, Huang M. Implementation of Highly Reliable Contacts for RF MEMS Switches. Micromachines. 2024;15(1):155. doi:10.3390/mi15010155

BibTeX
@article{Jiang2024,
  author = {Jiang, Lili and Wang, Lifeng and Huang, Xiaodong and Huang, Zhen and Huang, Min},
  title = {Implementation of Highly Reliable Contacts for RF MEMS Switches},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {1},
  pages = {155},
  doi = {10.3390/mi15010155}
}
Kostenlos starten →