Real-Time Temperature Prediction of Power Devices Using an Improved Thermal Equivalent Circuit Model and Application in Power Electronics
Micromachines · 28.12.2023 · 15 (1) · 63
DOI: 10.3390/mi15010063 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 28.12.2023. Verfasst von Zhen Hu und 2 weiteren Autor:innen. Beteiligte Einrichtung: College of Automation, Nanjing University of Posts and Telecommunications, Nanjing 210023, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Research Project of higher education institutions in Jiangsu Province, National Natural Science Foundation.
Abstract (Originalsprache)
As a core component of photovoltaic power generation systems, insulated gate bipolar transistor (IGBT) modules continually suffer from severe temperature swings due to complex operation conditions and various environmental conditions, resulting in fatigue failure. The junction temperature prediction guarantees that the IGBT module operates within the safety threshold. The thermal equivalent circuit model is a common approach to predicting junction temperature. However, the model parameters are easily affected by the solder aging. An accurate temperature prediction by the model is impossible during service. This paper proposes an improved thermal equivalent circuit model that can remove the effect of solder aging. Firstly, the solder aging process is monitored in real-time based on the case temperatures. Secondly, the model parameters are corrected by the thermal impedance from chip to baseplate based on the linear thermal characteristic. The simulation and experimental results show that the proposed model can reduce the temperature prediction error by more than 90% under the same aging condition. The proposed method only depends on the case temperatures to correct the model parameters, which is more economical. In addition, the experimental and simulation analysis in this work can help students of power electronics courses have an in-depth knowledge of power devices’ mechanical structure, heat dissipation principles, temperature distribution, junction temperature monitoring, and so on.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Automation, Nanjing University of Posts and Telecommunications, Nanjing 210023, China.
- School of Information and Electronics, Beijing Institute of Technology, Beijing 100081, China.
- School of Computer Science, Nanjing University of Posts and Telecommunications, Nanjing 210023, China.
ORCID-Profile: Zhen Hu
Förderung
- National Natural Science Foundation of China
- Natural Science Research Project of higher education institutions in Jiangsu Province
- National Natural Science Foundation
Zitieren
APA
Hu, Z., Cui, M., & Wu, X. (2023). Real-Time Temperature Prediction of Power Devices Using an Improved Thermal Equivalent Circuit Model and Application in Power Electronics. Micromachines, 15(1), 63. https://doi.org/10.3390/mi15010063
Vancouver
Hu Z, Cui M, Wu X. Real-Time Temperature Prediction of Power Devices Using an Improved Thermal Equivalent Circuit Model and Application in Power Electronics. Micromachines. 2023;15(1):63. doi:10.3390/mi15010063
BibTeX
@article{Hu2023,
author = {Hu, Zhen and Cui, Man and Wu, Xiaohua},
title = {Real-Time Temperature Prediction of Power Devices Using an Improved Thermal Equivalent Circuit Model and Application in Power Electronics},
journal = {Micromachines},
year = {2023},
volume = {15},
number = {1},
pages = {63},
doi = {10.3390/mi15010063}
}
EUVIMED