EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Amine-Impregnated Dendritic Mesoporous Silica for the Adsorption of Formaldehyde

Ji Myeong Lee, Misun Kang, June-Seo Kim iD, Jae Young Bae

Micromachines · 22.12.2023 · 15 (1) · 30

DOI: 10.3390/mi15010030 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 22.12.2023. Verfasst von Ji Myeong Lee und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Keimyung University, Daegu 42601, Republic of Korea. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Ministry of Trade, Industry & Energy (MOTIE, Korea).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To adsorb and remove formaldehyde, which is a harmful volatile organic chemical (VOC) detected indoors, an alkylamine was introduced into the substrate as a formaldehyde adsorbent. In this study, Tetraethylenepentaamine (TEPA) was introduced into the mesoporous silica using the amine impregnation method. Since the impregnated alkylamine can block the pores of the silica substrate, the pore size and pore volume are very important factors for its use as a substrate for an adsorbent. Focusing on the substrate’s pore properties, Santa Barbara Amorphous-15 (SBA-15) was chosen as a conventional one-dimensional pore-structured mesoporous silica, and dendritic mesoporous silica (DMS) as a three-dimensional pore-structured mesoporous silica. To 1 g each of silica substrate DMS and SBA-15, 0, 0.5, 1.5, and 2.5 g of TEPA were introduced. A fixed concentration and amount of formaldehyde gas was flowed through the adsorbent and then the adsorbent was changed to the 2,4-Dinitrophenylhydrazine (2,4-DNPH) cartridge to adsorb the remaining formaldehyde. According to the methods recommended by the World Health Organization (WHO) and National Institute for Occupational Safety & Health (NIOSH), the formaldehyde captured by 2,4-DNPH was analyzed using high-performance liquid chromatography (HPLC). A comparison of DMS and SBA-15 in the amine impregnation method shows that not only surface area, but also large pore size and high pore volume, contribute to the formaldehyde adsorption ability.

Schlagwörter

Stichwörter der Autor:innen

2,4-DNPHTEPAamine impregnation methoddendritic mesoporous silicaformaldehyde adsorptionformaldehyde-2,4-DNPHhierarchical mesoporous silicamesoporous silica

Autor:innen und Institutionen

  • Department of Chemistry, Keimyung University, Daegu 42601, Republic of Korea.
  • Division of Nanotechnology, Daegu Gyeongbuk Institute of Science & Technology (DGIST), Daegu 42988, Republic of Korea.

ORCID-Profile: June-Seo Kim

Förderung

  • Ministry of Trade, Industry and Energy
  • Ministry of Trade, Industry & Energy (MOTIE, Korea)

Zitieren

APA

Lee, J. M., Kang, M., Kim, J. S., & Bae, J. Y. (2023). Amine-Impregnated Dendritic Mesoporous Silica for the Adsorption of Formaldehyde. Micromachines, 15(1), 30. https://doi.org/10.3390/mi15010030

Vancouver

Lee JM, Kang M, Kim JS, Bae JY. Amine-Impregnated Dendritic Mesoporous Silica for the Adsorption of Formaldehyde. Micromachines. 2023;15(1):30. doi:10.3390/mi15010030

BibTeX
@article{Lee2023,
  author = {Lee, Ji Myeong and Kang, Misun and Kim, June-Seo and Bae, Jae Young},
  title = {Amine-Impregnated Dendritic Mesoporous Silica for the Adsorption of Formaldehyde},
  journal = {Micromachines},
  year = {2023},
  volume = {15},
  number = {1},
  pages = {30},
  doi = {10.3390/mi15010030}
}
Kostenlos starten →