EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of the Wall Temperature on Rarefied Gas Flows and Heat Transfer in a Micro-Nozzle

Shurui Zhang, Yong Li, Xudong Wang iD, Songcai Lu, Yusong Yu iD, Jun Yang iD

Micromachines · 22.12.2023 · 15 (1) · 22

DOI: 10.3390/mi15010022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 22.12.2023. Verfasst von Shurui Zhang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Hydrogen Energy and Space Propulsion Laboratory (HESPL), School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beiji…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, the Key R&D Project of the Ministry of Science and Technology of China, the National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

When the satellite is in orbit, the thruster will experience drastic temperature changes (100–1000 K) under solar radiation, which will affect the rarefied gas flow state in the micro-nozzle structure of the cold gas micro-thruster. In this study, the effect of different wall temperatures on the rarefied flow and heat transfer in the micro-nozzle is investigated based on the DSMC method. The micro-nozzle structure in this paper has a micro-channel with a large length-to-diameter ratio of 10 and a micro-scale needle valve displacement (maximum needle valve displacement up to 4 μm). This leads to more pronounced multiscale flow characteristics in the micro-nozzle, which is more influenced by the change in wall temperature. At wall temperatures ranging from 100 K to 1000 K, the spatial distribution of local Kn distribution, slip velocity distribution, temperature, and wall heat flux distribution in the micro-nozzle were calculated. The slip flow region is located in the flow channel and transforms into transition flow as the slip velocity reaches approximately 50 m/s. The spatial distribution of the flow pattern is dominated by the wall temperature at small needle valve opening ratios. The higher the wall temperature, the smaller the temperature drop ratio in the low-temperature region inside the micro-nozzle. The results of the study provide a reference for the design of temperature control of micro-nozzles in cold gas micro-thrusters.

Schlagwörter

Stichwörter der Autor:innen

DSMC methodcold gas micro-nozzlelarge length-to-diameter ratiomicro-channelneedle valve opening ratiorarefied flow

Autor:innen und Institutionen

  • Hydrogen Energy and Space Propulsion Laboratory (HESPL), School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China.
  • Beijing Institute of Control Engineering, Beijing 100190, China.
  • Changcheng Institute of Metrology and Measurement, Beijing 100095, China.

ORCID-Profile: Xudong Wang, Yusong Yu, Jun Yang

Förderung

  • National Key R&D Program of China
  • the Key R&D Project of the Ministry of Science and Technology of China
  • the National Natural Science Foundation of China

Zitieren

APA

Zhang, S., Li, Y., Wang, X., Lu, S., Yu, Y., & Yang, J. (2023). Effects of the Wall Temperature on Rarefied Gas Flows and Heat Transfer in a Micro-Nozzle. Micromachines, 15(1), 22. https://doi.org/10.3390/mi15010022

Vancouver

Zhang S, Li Y, Wang X, Lu S, Yu Y, Yang J. Effects of the Wall Temperature on Rarefied Gas Flows and Heat Transfer in a Micro-Nozzle. Micromachines. 2023;15(1):22. doi:10.3390/mi15010022

BibTeX
@article{Zhang2023,
  author = {Zhang, Shurui and Li, Yong and Wang, Xudong and Lu, Songcai and Yu, Yusong and Yang, Jun},
  title = {Effects of the Wall Temperature on Rarefied Gas Flows and Heat Transfer in a Micro-Nozzle},
  journal = {Micromachines},
  year = {2023},
  volume = {15},
  number = {1},
  pages = {22},
  doi = {10.3390/mi15010022}
}
Kostenlos starten →