Development of High-Performance Flexible Radiative Cooling Film Using PDMS/TiO2 Microparticles
Micromachines · 10.12.2023 · 14 (12) · 2223
DOI: 10.3390/mi14122223 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 10.12.2023. Verfasst von Junbo Jung und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Kongju National University, Cheonan 31080, Republic of Korea. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kongju National Univeristy, National Research Foundation of Korea, Kongju National University.
Abstract (Originalsprache)
Radiative cooling, which cools an object below its surrounding temperature without any energy consumption, is one of the most promising techniques for zero-energy systems. In principle, the radiative cooling technique reflects incident solar energy and emits its thermal radiation energy into outer space. To achieve maximized cooling performance, it is crucial to attain high spectral reflectance in the solar spectrum (0.3–2.5 μm) and high spectral emittance in the atmospheric window (8–13 μm). Despite the development of various radiative cooling techniques such as photonic crystals and metamaterials, applying the cooling technology in practical applications remains challenging due to its low flexibility and complicated manufacturing processes. Here, we develop a high-performance radiative cooling film using PDMS/TiO2 microparticles. Specifically, the design parameters such as microparticle diameter, microparticle volume fraction, and film thickness are considered through optical analysis. Additionally, we propose a novel fabrication process using low viscosity silicone oil for practical fabrication. The fabricated film accomplishes 67.1 W/m2 of cooling power, and we also analyze the cooling performance difference depending on the fabrication process based on the measurement and optical calculation results.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Kongju National University, Cheonan 31080, Republic of Korea.
- Energy Efficiency Research Division, Korea Institute of Energy Research, Daejeon 34129, Republic of Korea.
- Department of Mechanical and Automotive Engineering, Kongju National University, Cheonan 31080, Republic of Korea.
- Department of Future Convergence Engineering, Kongju National University, Cheonan 31080, Republic of Korea.
ORCID-Profile: Junbo Jung, Siwon Yoon, Bumjoo Kim, Joong Bae Kim
Förderung
- Kongju National Univeristy
- National Research Foundation of Korea
- Kongju National University
Zitieren
APA
Jung, J., Yoon, S., Kim, B., & Kim, J. B. (2023). Development of High-Performance Flexible Radiative Cooling Film Using PDMS/TiO2 Microparticles. Micromachines, 14(12), 2223. https://doi.org/10.3390/mi14122223
Vancouver
Jung J, Yoon S, Kim B, Kim JB. Development of High-Performance Flexible Radiative Cooling Film Using PDMS/TiO2 Microparticles. Micromachines. 2023;14(12):2223. doi:10.3390/mi14122223
BibTeX
@article{Jung2023,
author = {Jung, Junbo and Yoon, Siwon and Kim, Bumjoo and Kim, Joong Bae},
title = {Development of High-Performance Flexible Radiative Cooling Film Using PDMS/TiO2 Microparticles},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {12},
pages = {2223},
doi = {10.3390/mi14122223}
}
EUVIMED