The Physics and Manipulation of Dean Vortices in Single- and Two-Phase Flow in Curved Microchannels: A Review
Micromachines · 01.12.2023 · 14 (12) · 2202
DOI: 10.3390/mi14122202 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 01.12.2023. Verfasst von Yeganeh Saffar und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, University of Alberta, Edmonton, AB T6G 2R3, Canada. Die Arbeit wurde bisher 52-mal zitiert (Crossref) und nennt 150 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Microchannels with curved geometries have been employed for many applications in microfluidic devices in the past decades. The Dean vortices generated in such geometries have been manipulated using different methods to enhance the performance of devices in applications such as mixing, droplet sorting, and particle/cell separation. Understanding the effect of the manipulation method on the Dean vortices in different geometries can provide crucial information to be employed in designing high-efficiency microfluidic devices. In this review, the physics of Dean vortices and the affecting parameters are summarized. Various Dean number calculation methods are collected and represented to minimize the misinterpretation of published information due to the lack of a unified defining formula for the Dean dimensionless number. Consequently, all Dean number values reported in the references are recalculated to the most common method to facilitate comprehension of the phenomena. Based on the converted information gathered from previous numerical and experimental studies, it is concluded that the length of the channel and the channel pathline, e.g., spiral, serpentine, or helix, also affect the flow state. This review also provides a detailed summery on the effect of other geometric parameters, such as cross-section shape, aspect ratio, and radius of curvature, on the Dean vortices’ number and arrangement. Finally, considering the importance of droplet microfluidics, the effect of curved geometry on the shape, trajectory, and internal flow organization of the droplets passing through a curved channel has been reviewed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical Engineering Department, University of Alberta, Edmonton, AB T6G 2R3, Canada.
ORCID-Profile: Yeganeh Saffar, David S Nobes, Reza Sabbagh
Zitieren
APA
Saffar, Y., Kashanj, S., Nobes, D. S., & Sabbagh, R. (2023). The Physics and Manipulation of Dean Vortices in Single- and Two-Phase Flow in Curved Microchannels: A Review. Micromachines, 14(12), 2202. https://doi.org/10.3390/mi14122202
Vancouver
Saffar Y, Kashanj S, Nobes DS, Sabbagh R. The Physics and Manipulation of Dean Vortices in Single- and Two-Phase Flow in Curved Microchannels: A Review. Micromachines. 2023;14(12):2202. doi:10.3390/mi14122202
BibTeX
@article{Saffar2023,
author = {Saffar, Yeganeh and Kashanj, Sina and Nobes, David S and Sabbagh, Reza},
title = {The Physics and Manipulation of Dean Vortices in Single- and Two-Phase Flow in Curved Microchannels: A Review},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {12},
pages = {2202},
doi = {10.3390/mi14122202}
}
EUVIMED