EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Improved Method for Indoor 3D Pedestrian Positioning Based on Dual Foot-Mounted IMU System

Haonan Jia iD, Baoguo Yu, Hongsheng Li, Shuguo Pan, Jun Li, Xinjian Wang, Lu Huang

Micromachines · 30.11.2023 · 14 (12) · 2192

DOI: 10.3390/mi14122192 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 30.11.2023. Verfasst von Haonan Jia und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key Research and Development Program of China, National Key Research and Development Program of China (project: High Precision Positioning, Navigation and Control Technology for Large Underground Space.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Micro-Electro-Mechanical System (MEMS) inertial sensors, characterized by their small size, low cost, and low power consumption, are commonly used in foot-mounted wearable pedestrian autonomous positioning systems. However, they also have drawbacks such as heading drift and poor repeatability. To address these issues, this paper proposes an improved pedestrian autonomous 3D positioning algorithm based on dual-foot motion characteristic constraints. Two sets of small-sized Inertial Measurement Units (IMU) are worn on the left and right feet of pedestrians to form an autonomous positioning system, each integrated with low-cost, low-power micro-inertial sensor chips. On the one hand, an improved adaptive zero-velocity detection algorithm is employed to enhance discrimination accuracy under different step-speed conditions. On the other hand, considering the dual-foot gait characteristics and the height difference feature during stair ascent and descent, horizontal position update algorithms based on dual-foot motion trajectory constraints and height update algorithms based on dual-foot height differences are, respectively, designed. These algorithms aim to re-correct the pedestrian position information updated at zero velocity in both horizontal and vertical directions. The experimental results indicate that in a laboratory environment, the 3D positioning error is reduced by 93.9% compared to unconstrained conditions. Simultaneously, the proposed approach enhances the accuracy, continuity, and repeatability of the foot-mounted IMU positioning system without the need for additional power consumption.

Schlagwörter

Stichwörter der Autor:innen

Inertial Measurement Unit (IMU)Kalman filterdual-footinequality constraintpedestrian navigation

Autor:innen und Institutionen

  • School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China.
  • State Key Laboratory of Satellite Navigation System and Equipment Technology, The 54th Research Institute of China Electronics Technology Group Corporation, Shijiazhuang 050081, China.

ORCID-Profile: Haonan Jia

Förderung

  • the National Key Research and Development Program of China
  • National Key Research and Development Program of China (project: High Precision Positioning, Navigation and Control Technology for Large Underground Space

Zitieren

APA

Jia, H., Yu, B., Li, H., Pan, S., Li, J., Wang, X., & Huang, L. (2023). The Improved Method for Indoor 3D Pedestrian Positioning Based on Dual Foot-Mounted IMU System. Micromachines, 14(12), 2192. https://doi.org/10.3390/mi14122192

Vancouver

Jia H, Yu B, Li H, Pan S, Li J, Wang X, et al. The Improved Method for Indoor 3D Pedestrian Positioning Based on Dual Foot-Mounted IMU System. Micromachines. 2023;14(12):2192. doi:10.3390/mi14122192

BibTeX
@article{Jia2023,
  author = {Jia, Haonan and Yu, Baoguo and Li, Hongsheng and Pan, Shuguo and Li, Jun and Wang, Xinjian and Huang, Lu},
  title = {The Improved Method for Indoor 3D Pedestrian Positioning Based on Dual Foot-Mounted IMU System},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {12},
  pages = {2192},
  doi = {10.3390/mi14122192}
}
Kostenlos starten →