EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Investigation into the Surface Integrity of Micro-Machined High-Speed Steel and Tungsten Carbide Cutting Tools

Minh Nhat Dang iD, Surinder Singh iD, John H Navarro-Devia iD, Hannah J King iD, Rosalie K Hocking, Scott A Wade iD, Guy Stephens, Angelo Papageorgiou, James Wang

Micromachines · 22.10.2023 · 14 (10) · 1970

DOI: 10.3390/mi14101970 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 22.10.2023. Verfasst von Minh Nhat Dang und 8 weiteren Autor:innen. Beteiligte Einrichtung: The Australian Research Council (ARC) Training Centre in Surface Engineering for Advanced Materials (SEAM), School of Engineering, Swinburne Universi…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council Industrial Transformation Training Centre funding scheme, in Surface Engineering for Advanced Materials, Australian Research Council (ARC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance and lifespan of cutting tools are significantly influenced by their surface quality. The present report highlights recent advances in enhancing the surface characteristics of tungsten carbide and high-speed steel cutting tools using a novel micro-machining technique for polishing and edge-honing. Notably, the main aim was to reduce the surface roughness while maintaining the hardness of the materials at an optimal level. By conducting a thorough analysis of surfaces obtained using different techniques, it was found that the micro-machining method effectively decreased the surface roughness of the cutting tools the most effectively out of the techniques investigated. Significantly, the surface roughness was reduced from an initial measurement of 400 nm to an impressive value of 60 nm. No significant change in hardness was observed, which guarantees the maintenance of the mechanical properties of the cutting tools. This analysis enhances the comprehension of surface enhancement methodologies for cutting tools through the presentation of these findings. The observed decrease in surface roughness, along with the consistent hardness, exhibits potential for improving tool performance. These enhancements possess the capacity to optimise manufacturing processes, increase tool reliability, and minimise waste generation.

Schlagwörter

Stichwörter der Autor:innen

cutting toolshigh-speed steelsmicro machiningsurface roughnesstungsten carbide

Autor:innen und Institutionen

  • The Australian Research Council (ARC) Training Centre in Surface Engineering for Advanced Materials (SEAM), School of Engineering, Swinburne University of Technology, P.O. Box 218, Hawthorn, VIC 3122, Australia.
  • Sutton Tools, 378 Settlement Rd, Thomastown, VIC 3074, Australia.

ORCID-Profile: Minh Nhat Dang, Surinder Singh, John H Navarro-Devia, Hannah J King, Scott A Wade

Förderung

  • Australian Research Council Industrial Transformation Training Centre funding scheme, in Surface Engineering for Advanced Materials
  • Australian Research Council (ARC)

Zitieren

APA

Dang, M. N., Singh, S., Navarro-Devia, J. H., King, H. J., Hocking, R. K., Wade, S. A., Stephens, G., Papageorgiou, A., & Wang, J. (2023). An Investigation into the Surface Integrity of Micro-Machined High-Speed Steel and Tungsten Carbide Cutting Tools. Micromachines, 14(10), 1970. https://doi.org/10.3390/mi14101970

Vancouver

Dang MN, Singh S, Navarro-Devia JH, King HJ, Hocking RK, Wade SA, et al. An Investigation into the Surface Integrity of Micro-Machined High-Speed Steel and Tungsten Carbide Cutting Tools. Micromachines. 2023;14(10):1970. doi:10.3390/mi14101970

BibTeX
@article{Dang2023,
  author = {Dang, Minh Nhat and Singh, Surinder and Navarro-Devia, John H and King, Hannah J and Hocking, Rosalie K and Wade, Scott A and Stephens, Guy and Papageorgiou, Angelo and Wang, James},
  title = {An Investigation into the Surface Integrity of Micro-Machined High-Speed Steel and Tungsten Carbide Cutting Tools},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {10},
  pages = {1970},
  doi = {10.3390/mi14101970}
}
Kostenlos starten →