EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Electrical Parameters on Micro-Arc Oxidation Coatings on Pure Titanium

Aqeel Abbas iD, Hsuan-Ping Kung, Hsin-Chih Lin

Micromachines · 19.10.2023 · 14 (10) · 1950

DOI: 10.3390/mi14101950 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 19.10.2023. Verfasst von Aqeel Abbas und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Taiwan University, Taipei 10617, Taiwan. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The micro-arc oxidation process was used to apply a ceramic oxide coating on a pure titanium substrate using calcium acetate and sodium dihydrogen phosphate as an electrolyte. The influence of the current frequency and duty ratio on the surface morphology, phase composition, wear behavior, and corrosion resistance were analyzed by employing a scanning electron microscope, X-ray diffractometer, ball-on-disk apparatus, and potentiodynamic polarization, respectively. Analyses of the surface and cross-sectional morphologies revealed that the MAO films prepared via a low current frequency (100 Hz) and a high duty ratio (60%) had a lower porosity and were more compact. The medium (500 Hz) and high (1000 Hz) frequencies at the higher duty ratios presented with better wear resistance. The highest film thickness (11.25 µm) was achieved at 100 Hz and a 20% duty ratio. A negligible current density was observed when the frequency was fixed at 500 Hz and 1000 Hz and the duty cycle was 20%.

Schlagwörter

Stichwörter der Autor:innen

electrochemistrymicro-arc oxidation (MAO)microstructurespure titaniumwear test

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, National Taiwan University, Taipei 10617, Taiwan.

ORCID-Profile: Aqeel Abbas

Förderung

  • Ministry of Science and Technology

Zitieren

APA

Abbas, A., Kung, H. P., & Lin, H. C. (2023). Effects of Electrical Parameters on Micro-Arc Oxidation Coatings on Pure Titanium. Micromachines, 14(10), 1950. https://doi.org/10.3390/mi14101950

Vancouver

Abbas A, Kung HP, Lin HC. Effects of Electrical Parameters on Micro-Arc Oxidation Coatings on Pure Titanium. Micromachines. 2023;14(10):1950. doi:10.3390/mi14101950

BibTeX
@article{Abbas2023,
  author = {Abbas, Aqeel and Kung, Hsuan-Ping and Lin, Hsin-Chih},
  title = {Effects of Electrical Parameters on Micro-Arc Oxidation Coatings on Pure Titanium},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {10},
  pages = {1950},
  doi = {10.3390/mi14101950}
}
Kostenlos starten →