EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tunable Helmholtz Resonators Using Multiple Necks

Nikolaos M Papadakis iD, Georgios E Stavroulakis iD

Micromachines · 15.10.2023 · 14 (10) · 1932

DOI: 10.3390/mi14101932 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 15.10.2023. Verfasst von Nikolaos M Papadakis und 1 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Computational Mechanics and Optimization (Co.Mec.O), School of Production Engineering and Management, Technical University of Crete, 731…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One of the uses of Helmholtz resonators is as sound absorbers for room acoustic applications, especially for the low frequency range. Their efficiency is centered around their resonance frequency which mainly depends on elements of their geometry such as the resonator volume and neck dimensions. Incorporating additional necks on the body of a Helmholtz resonator (depending on whether they are open or closed) has been found to alter the resulting resonance frequency. For this study, tunable Helmholtz resonators to multiple resonance frequencies, are proposed and investigated utilizing additional necks. The resonance frequencies of various multi-neck Helmholtz resonators are first modeled with the use of the finite element method (FEM), then calculated with the use of an analytical approach and the results of the two approaches are finally compared. The results of this study show that Helmholtz resonators with multiple resonances at desired frequencies are achievable with the use of additional necks, while FEM and analytical methods can be used for the estimation of the resonance frequencies. Analytical and FEM approach results show a good agreement in cases of small number of additional necks, while the increasing differences in cases of higher neck additions, were attributed to the change in effective length of the necks as demonstrated by FEM. The proposed approach can be useful for tunable sound absorbers for room acoustics applications according to the needs of a space. Also, this approach can be applied in cases of additional tunable air resonances of acoustic instruments (e.g., string instruments).

Schlagwörter

Stichwörter der Autor:innen

Helmholtz resonatoracoustic transmissionarchitectural acousticsfinite element methodmulti-neck Helmholtz resonatormusical acousticsroom acousticssound absorbersound absorption

Autor:innen und Institutionen

  • Institute of Computational Mechanics and Optimization (Co.Mec.O), School of Production Engineering and Management, Technical University of Crete, 73100 Chania, Greece.

ORCID-Profile: Nikolaos M Papadakis, Georgios E Stavroulakis

Zitieren

APA

Papadakis, N. M., & Stavroulakis, G. E. (2023). Tunable Helmholtz Resonators Using Multiple Necks. Micromachines, 14(10), 1932. https://doi.org/10.3390/mi14101932

Vancouver

Papadakis NM, Stavroulakis GE. Tunable Helmholtz Resonators Using Multiple Necks. Micromachines. 2023;14(10):1932. doi:10.3390/mi14101932

BibTeX
@article{Papadakis2023,
  author = {Papadakis, Nikolaos M and Stavroulakis, Georgios E},
  title = {Tunable Helmholtz Resonators Using Multiple Necks},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {10},
  pages = {1932},
  doi = {10.3390/mi14101932}
}
Kostenlos starten →