Design and Analysis of Ultra-Precision Smart Cutting Tool for In-Process Force Measurement and Tool Nanopositioning in Ultra-High-Precision Single-Point Diamond Turning
Micromachines · 28.09.2023 · 14 (10) · 1857
DOI: 10.3390/mi14101857 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 28.09.2023. Verfasst von Shahrokh Hatefi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechatronics, Faculty of Engineering, the Built Environment and Technology, Nelson Mandela University, Port Elizabeth 6000, South Afric…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Ultra-high-precision single-point diamond turning (SPDT) is the state-of-the-art machining technology for the advanced manufacturing of critical components with an optical surface finish and surface roughness down to one nanometer. One of the critical factors that directly affects the quality of the diamond-cutting process is the cutting force. Increasing the cutting force can induce tool wear, increase the cutting temperature, and amplify the positioning errors of the diamond tool caused by the applied cutting force. It is important to measure the cutting force during the SPDT process to monitor the tool wear and surface defects in real time. By measuring the cutting force in different cutting conditions, the optimum cutting parameters can be determined and the best surface accuracies with minimum surface roughness can be achieved. In this study a smart cutting tool for in-process force measurement and nanopositioning of the cutting tool for compensating the displacements of the diamond tool during the cutting process is designed and analyzed. The proposed smart cutting tool can measure applied forces to the diamond tool and correct the nanometric positioning displacements of the diamond tool in three dimensions. The proposed cutting tool is wireless and can be used in hybrid and intelligent SPDT platforms to achieve the best results in terms of optical surface finish. The simulation results are shown to be almost consistent with the results of the derived analytical model. The preliminary results pave the way for promising applications of the proposed smart cutting tool in SPDT applications in the future.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechatronics, Faculty of Engineering, the Built Environment and Technology, Nelson Mandela University, Port Elizabeth 6000, South Africa.
ORCID-Profile: Shahrokh Hatefi, Farouk Smith
Zitieren
APA
Hatefi, S., & Smith, F. (2023). Design and Analysis of Ultra-Precision Smart Cutting Tool for In-Process Force Measurement and Tool Nanopositioning in Ultra-High-Precision Single-Point Diamond Turning. Micromachines, 14(10), 1857. https://doi.org/10.3390/mi14101857
Vancouver
Hatefi S, Smith F. Design and Analysis of Ultra-Precision Smart Cutting Tool for In-Process Force Measurement and Tool Nanopositioning in Ultra-High-Precision Single-Point Diamond Turning. Micromachines. 2023;14(10):1857. doi:10.3390/mi14101857
BibTeX
@article{Hatefi2023,
author = {Hatefi, Shahrokh and Smith, Farouk},
title = {Design and Analysis of Ultra-Precision Smart Cutting Tool for In-Process Force Measurement and Tool Nanopositioning in Ultra-High-Precision Single-Point Diamond Turning},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {10},
pages = {1857},
doi = {10.3390/mi14101857}
}
EUVIMED