A Swiss-Roll-Type Methanol Mini-Steam Reformer for Hydrogen Generation with High Efficiency and Long-Term Durability
Micromachines · 27.09.2023 · 14 (10) · 1845
DOI: 10.3390/mi14101845 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 27.09.2023. Verfasst von Fan-Gang Tseng und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering and System Science, National Tsing Hua University, Hshinchu 300, Taiwan. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology (MOST) of Taiwan.
Abstract (Originalsprache)
This paper proposes a Swiss-roll-type mini-reformer employing a copper–zinc catalyst for high-efficient SRM process. Although the commercially available copper–zinc catalysts commonly used in cylindrical-type reformers provide decent conversion rates in the short term, their long-term durability still requires improvement, mainly due to temperature variations in the reformer, catalyst loading, and thermal sintering issues. This Swiss-roll-shaped mini-reformer is designed to improve thermal energy preservation/temperature uniformity by using dual spiral channels to improve the long-term durability while maintaining methanol-reforming efficiency. It was fabricated on a copper plate that was 80 mm wide, 80 mm long, and 4 mm high with spiral channels that were 2 mm deep, 4 mm wide, and 350 mm long. To optimize the design and reformer operation, the catalyst porosity, gas hourly speed velocity (GHSV), operation temperature, and fuel feeding rate are investigated. Swiss-roll-type reformers may require higher driving pressures but can provide better thermal energy preservation and temperature uniformity, posing a higher conversion rate for the same amount of catalyst when compared with other geometries. By carefully adjusting the catalyst bed porosity, locations, and catalyst loading amount as well as other conditions, an optimized gas hourly space velocity (GHSV) can be obtained (14,580 mL/g·h) and lead to not only a high conversion rate (96%) and low carbon monoxide generation rate (0.98%) but also a better long-term durability (decay from 96% to 88.12% after 60 h operation time) for SRM processes. The decay rate, 0.13%/h, after 60 h of operation, is five-folds lower than that (0.67%/h, 0.134%/h) of a commercial cylindrical-type fixed-bed reactor with a commercial catalyst.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Engineering and System Science, National Tsing Hua University, Hshinchu 300, Taiwan.
ORCID-Profile: Fan-Gang Tseng
Förderung
- Ministry of Science and Technology (MOST) of Taiwan
Zitieren
APA
Tseng, F. G., Chiu, W. C., & Huang, P. J. (2023). A Swiss-Roll-Type Methanol Mini-Steam Reformer for Hydrogen Generation with High Efficiency and Long-Term Durability. Micromachines, 14(10), 1845. https://doi.org/10.3390/mi14101845
Vancouver
Tseng FG, Chiu WC, Huang PJ. A Swiss-Roll-Type Methanol Mini-Steam Reformer for Hydrogen Generation with High Efficiency and Long-Term Durability. Micromachines. 2023;14(10):1845. doi:10.3390/mi14101845
BibTeX
@article{Tseng2023,
author = {Tseng, Fan-Gang and Chiu, Wei-Cheng and Huang, Po-Jung},
title = {A Swiss-Roll-Type Methanol Mini-Steam Reformer for Hydrogen Generation with High Efficiency and Long-Term Durability},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {10},
pages = {1845},
doi = {10.3390/mi14101845}
}
EUVIMED