EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on Carbon Fiber-Reinforced Polymer Groove Machining by High-Power Water-Jet-Guided Laser

Shuo Meng, Yugang Zhao, Dandan Zhao, Chuang Zhao, Yu Tang, Zhihao Li, Hanlin Yu, Guangxin Liu, Chen Cao, Jianbing Meng iD

Micromachines · 31.08.2023 · 14 (9) · 1721

DOI: 10.3390/mi14091721 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 31.08.2023. Verfasst von Shuo Meng und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Shandong University of Technology, Zibo 255049, China. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the Natural Science Foundation of Shandong Province, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to the excellent properties of carbon fiber-reinforced polymers (CFRPs), such as high strength and strong corrosion resistance, the traditional water-jet-guided laser (WJGL) technology has problems with fiber pull-out and has a small cutting depth when processing CFRPs. Therefore, in this study, we used high-power water-jet-guided laser (HPWJGL) technology to perform groove processing experiments on CFRPs. The effects of four key process parameters, high laser power, pulse frequency, feed rate, and water-jet pressure, on the cutting depth were investigated by a single-factor experiment. The formation mechanism of groove cross-section morphology and the processing advantages of high-power water-jet-guided lasers were analyzed. On this basis, the mathematical prediction model of cutting depth was established by using the response surface method (RSM), and the optimal combination of process parameters was obtained. The mathematical prediction model was verified by experiments, and the error was only 1.84%, indicating that the model had a high reference value. This study provides a reference for the precision machining of HPWJGL technology.

Schlagwörter

Stichwörter der Autor:innen

CFRPRSMcutting depthhigh-power water-jet-guided laser

Autor:innen und Institutionen

  • School of Mechanical Engineering, Shandong University of Technology, Zibo 255049, China.

ORCID-Profile: Jianbing Meng

Förderung

  • the National Natural Science Foundation of China
  • the Natural Science Foundation of Shandong Province
  • National Natural Science Foundation of China
  • Natural Science Foundation of Shandong Province

Zitieren

APA

Meng, S., Zhao, Y., Zhao, D., Zhao, C., Tang, Y., Li, Z., Yu, H., Liu, G., Cao, C., & Meng, J. (2023). Experimental Study on Carbon Fiber-Reinforced Polymer Groove Machining by High-Power Water-Jet-Guided Laser. Micromachines, 14(9), 1721. https://doi.org/10.3390/mi14091721

Vancouver

Meng S, Zhao Y, Zhao D, Zhao C, Tang Y, Li Z, et al. Experimental Study on Carbon Fiber-Reinforced Polymer Groove Machining by High-Power Water-Jet-Guided Laser. Micromachines. 2023;14(9):1721. doi:10.3390/mi14091721

BibTeX
@article{Meng2023,
  author = {Meng, Shuo and Zhao, Yugang and Zhao, Dandan and Zhao, Chuang and Tang, Yu and Li, Zhihao and Yu, Hanlin and Liu, Guangxin and Cao, Chen and Meng, Jianbing},
  title = {Experimental Study on Carbon Fiber-Reinforced Polymer Groove Machining by High-Power Water-Jet-Guided Laser},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {9},
  pages = {1721},
  doi = {10.3390/mi14091721}
}
Kostenlos starten →