Failure Analysis for Gold Wire Bonding of Sensor Packaging Based on Experimental and Numerical Methods
Micromachines · 30.08.2023 · 14 (9) · 1695
DOI: 10.3390/mi14091695 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 30.08.2023. Verfasst von Yameng Sun und 7 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory for Electronic Manufacturing and Packaging Integration, The Institute of Technological Sciences, Wuhan University, Wuhan 430070, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key R&D Program of China, the Hubei Provincial Strategic Scientist Training Plan, the Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
There is an increasing demand for the use of automotive sensors where complex working environments may easily lead to failure. Wire pull and shear test models based on finite-element analysis are established to evaluate their reliability by investigating the failure mode and mechanism of gold wire bonding. The effect of shear force position and pull force position on failure is also analyzed. The bonding failure was verified by experiments, which is consistent with the simulation result. The results show that: (1) The three-dimensional quantitative modeling reveals the process of bonding delamination and stress concentration. (2) The bonding–slip method (BSM) is adopted in the gold ball detaching process. The concept of three states, including deformation accumulation, cracking, and disengagement, was put forward to reveal the interface stress evolution trend according to the shear testing results. The results indicate that in the interface, the stress in the deformation accumulation state decreases from the tensile side (or compression side) to the center, and the stress in the cracking and disengagement states reduces gradually from the tensile side to the edge. When the interface is completely separated, the failed shear force concentrates on 42 g. The concept and theory proposed in this work can effectively reveal the failure mechanism of bonding interface and help to establish a new failure criterion.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory for Electronic Manufacturing and Packaging Integration, The Institute of Technological Sciences, Wuhan University, Wuhan 430070, China.
- School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430070, China.
- Hefei Archimedes Electronic Technology Co., Ltd., Hefei 230000, China.
- School of Power and Mechanical Engineering, Wuhan University, Wuhan 430070, China.
Förderung
- the National Key R&D Program of China
- the Hubei Provincial Strategic Scientist Training Plan
- the Fundamental Research Funds for the Central Universities
- the National Key R&D Program of China
Zitieren
APA
Sun, Y., Ma, K., Song, Y., Zi, T., Liu, X., Feng, Z., Zhou, Y., & Liu, S. (2023). Failure Analysis for Gold Wire Bonding of Sensor Packaging Based on Experimental and Numerical Methods. Micromachines, 14(9), 1695. https://doi.org/10.3390/mi14091695
Vancouver
Sun Y, Ma K, Song Y, Zi T, Liu X, Feng Z, et al. Failure Analysis for Gold Wire Bonding of Sensor Packaging Based on Experimental and Numerical Methods. Micromachines. 2023;14(9):1695. doi:10.3390/mi14091695
BibTeX
@article{Sun2023,
author = {Sun, Yameng and Ma, Kun and Song, Yifan and Zi, Tongtong and Liu, Xun and Feng, Zheng and Zhou, Yang and Liu, Sheng},
title = {Failure Analysis for Gold Wire Bonding of Sensor Packaging Based on Experimental and Numerical Methods},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {9},
pages = {1695},
doi = {10.3390/mi14091695}
}
EUVIMED