EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Diamond Wire Saw Processing Parameters on the Sawn Surface Characteristics of Silicon Nitride Ceramics

Siyuan Zhang, Yufei Gao, Xingchun Zhang, Yufeng Guo

Micromachines · 25.08.2023 · 14 (9) · 1660

DOI: 10.3390/mi14091660 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 25.08.2023. Verfasst von Siyuan Zhang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan 250061, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province, National Natural Science Foundation of China, National Key Research and Development Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For the slicing of superhard silicon nitride ceramics, diamond wire sawing technology has great potential for application, and its slicing surface characteristics are an important indicator of cutting quality. In this paper, the sawing experiments of silicon nitride ceramics were carried out within the range of industrial processing parameters of diamond wire sawing (saw wire speed: 800–1600 m/min, workpiece feed speed 0.1–0.4 mm/min). The effects of cutting parameters on the surface morphology, surface roughness and waviness of the as-sawn slices were analyzed. The results show that within the range of sawing parameters for industrial applications, the material on the diamond wire as-sawn surface of silicon nitride ceramics is removed mainly in a brittle mode, with the slice morphology showing brittle pits and regularly distributed wire marks in the 20–55 μm scale range. The surface roughness of the slices along the workpiece feed direction ranges from 0.27 to 0.38 μm and decreases with increasing saw wire speed and decreasing feed rate. The surface waviness ranges from 0.09 to 0.21 μm, which is in good agreement with the changing trend of the sliced-surface roughness. The results of the study provide an experimental reference for promoting the engineering application of diamond wire sawing technology to the processing of silicon nitride ceramic slices.

Schlagwörter

Stichwörter der Autor:innen

diamond wire saw slicingsilicon nitride ceramicssurface morphologysurface roughnesswaviness

Autor:innen und Institutionen

  • Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan 250061, China.

Förderung

  • Natural Science Foundation of Shandong Province
  • National Natural Science Foundation of China
  • National Key Research and Development Project

Zitieren

APA

Zhang, S., Gao, Y., Zhang, X., & Guo, Y. (2023). Influence of Diamond Wire Saw Processing Parameters on the Sawn Surface Characteristics of Silicon Nitride Ceramics. Micromachines, 14(9), 1660. https://doi.org/10.3390/mi14091660

Vancouver

Zhang S, Gao Y, Zhang X, Guo Y. Influence of Diamond Wire Saw Processing Parameters on the Sawn Surface Characteristics of Silicon Nitride Ceramics. Micromachines. 2023;14(9):1660. doi:10.3390/mi14091660

BibTeX
@article{Zhang2023,
  author = {Zhang, Siyuan and Gao, Yufei and Zhang, Xingchun and Guo, Yufeng},
  title = {Influence of Diamond Wire Saw Processing Parameters on the Sawn Surface Characteristics of Silicon Nitride Ceramics},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {9},
  pages = {1660},
  doi = {10.3390/mi14091660}
}
Kostenlos starten →