A Highly Efficient Electromagnetic Wave Absorption System with Graphene Embedded in Hybrid Perovskite
Micromachines · 16.08.2023 · 14 (8) · 1611
DOI: 10.3390/mi14081611 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 16.08.2023. Verfasst von Haitao Yu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Field Engineering College, Army Engineering University of PLA, Nanjing 210007, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nature Science Foundation of Jiangsu Province, Chinese Postdoctoral Science Fund, Funded by State Key Laboratory of Disaster Prevention & Mitigation of Explosion & Impact.
Abstract (Originalsprache)
To cope with the explosive increase in electromagnetic radiation intensity caused by the widespread use of electronic information equipment, high-performance electromagnetic wave (EMW)-absorbing materials that can adapt to various frequency bands of EMW are also facing great demand. In this paper, CH3NH3PbI3/graphene (MG) high-performance EMW-absorbing materials were innovatively synthesized by taking organic–inorganic hybrid perovskite (OIHP) with high equilibrium holes, electron mobility, and accessible synthesis as the main body, graphene as the intergranular component, and adjusting the component ratio. When the component ratio was 16:1, the thickness of the absorber was 1.87 mm, and MG’s effective EMW absorption width reached 6.04 GHz (11.96–18.00 GHz), achieving complete coverage of the Ku frequency band. As the main body of the composite, CH3NH3PbI3 played the role of the polarization density center, and the defects and vacancies in the crystal significantly increased the polarization loss intensity; graphene, as a typical two-dimensional material distributed in the crystal gap, built an efficient electron transfer channel, which significantly improved the electrical conductivity loss strength. This work effectively broadened the EMW absorption frequency band of OIHP and promoted the research process of new EMW-absorbing materials based on OIPH.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Field Engineering College, Army Engineering University of PLA, Nanjing 210007, China.
- Unit of 32399 of PLA, Nanjing 211131, China.
- State Key Laboratory for Disaster Prevention & Mitigation of Explosion & Impact, Army Engineering University of PLA, Nanjing 210007, China.
- Position Engineering Research Office, Army Engineering University of PLA, Nanjing 210007, China.
- Electromagnetic Environmental Effects Laboratory, Army Engineering University of PLA, Nanjing 210007, China.
ORCID-Profile: Ziming Xiong, Zhi Zhang
Förderung
- Nature Science Foundation of Jiangsu Province
- Chinese Postdoctoral Science Fund
- Funded by State Key Laboratory of Disaster Prevention & Mitigation of Explosion & Impact
- State Key Laboratory of Disaster Prevention & Mitigation of Explosion & Impact
Zitieren
APA
Yu, H., Liu, H., Yao, Y., Xiong, Z., Gao, L., Yang, Z., Zhou, W., & Zhang, Z. (2023). A Highly Efficient Electromagnetic Wave Absorption System with Graphene Embedded in Hybrid Perovskite. Micromachines, 14(8), 1611. https://doi.org/10.3390/mi14081611
Vancouver
Yu H, Liu H, Yao Y, Xiong Z, Gao L, Yang Z, et al. A Highly Efficient Electromagnetic Wave Absorption System with Graphene Embedded in Hybrid Perovskite. Micromachines. 2023;14(8):1611. doi:10.3390/mi14081611
BibTeX
@article{Yu2023,
author = {Yu, Haitao and Liu, Hui and Yao, Yao and Xiong, Ziming and Gao, Lei and Yang, Zhiqian and Zhou, Wenke and Zhang, Zhi},
title = {A Highly Efficient Electromagnetic Wave Absorption System with Graphene Embedded in Hybrid Perovskite},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {8},
pages = {1611},
doi = {10.3390/mi14081611}
}
EUVIMED