Improving Performance and Breakdown Voltage in Normally-Off GaN Recessed Gate MIS-HEMTs Using Atomic Layer Etching and Gate Field Plate for High-Power Device Applications
Micromachines · 11.08.2023 · 14 (8) · 1582
DOI: 10.3390/mi14081582 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 11.08.2023. Verfasst von An-Chen Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Photonics, Institute of Electro-Optical Engineering, National Yang Ming Chiao Tung University, Hsinchu 30010, Taiwan. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology, Taiwan.
Abstract (Originalsprache)
A typical method for normally-off operation, the metal–insulator–semiconductor-high electron mobility transistor (MIS-HEMT) has been investigated. Among various approaches, gate recessed MIS-HEMT have demonstrated a high gate voltage sweep and low leakage current characteristics. Despite their high performance, obtaining low-damage techniques in gate recess processing has so far proven too challenging. In this letter, we demonstrate a high current density and high breakdown down voltage of a MIS-HEMT with a recessed gate by the low damage gate recessed etching of atomic layer etching (ALE) technology. After the remaining 3.7 nm of the AlGaN recessed gate was formed, the surface roughness (Ra of 0.40 nm) was almost the same as the surface without ALE (no etching) as measured by atomic force microscopy (AFM). Furthermore, the devices demonstrate state-of-the-art characteristics with a competitive maximum drain current of 608 mA/mm at a VG of 6 V and a threshold voltage of +2.0 V. The devices also show an on/off current ratio of 109 and an off-state hard breakdown voltage of 1190 V. The low damage of ALE technology was introduced into the MIS-HEMT with the recessed gate, which effectively reduced trapping states at the interface to obtain the low on-resistance (Ron) of 6.8 Ω·mm and high breakdown voltage performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Photonics, Institute of Electro-Optical Engineering, National Yang Ming Chiao Tung University, Hsinchu 30010, Taiwan.
- Electronic and Optoelectronic System Research Laboratories, Industrial Technology Research Institute, Zhudong 310401, Taiwan.
- Institute of Advanced Semiconductor Packaging and Testing, National Sun Yat-sen University, Kaohsiung 804201, Taiwan.
- Research Center for Applied Sciences, Academia Sinica, 128 Sec. 2, Academia Rd., Nankang, Taipei 115, Taiwan.
- Semiconductor Research Center, Hon Hai Research Institute, Taipei 114699, Taiwan.
ORCID-Profile: Hsin-Chu Chen, Yung-Yu Lai, Hao-Chung Kuo
Förderung
- Ministry of Science and Technology, Taiwan
Zitieren
APA
Liu, A. C., Tu, P. T., Chen, H. C., Lai, Y. Y., Yeh, P. C., & Kuo, H. C. (2023). Improving Performance and Breakdown Voltage in Normally-Off GaN Recessed Gate MIS-HEMTs Using Atomic Layer Etching and Gate Field Plate for High-Power Device Applications. Micromachines, 14(8), 1582. https://doi.org/10.3390/mi14081582
Vancouver
Liu AC, Tu PT, Chen HC, Lai YY, Yeh PC, Kuo HC. Improving Performance and Breakdown Voltage in Normally-Off GaN Recessed Gate MIS-HEMTs Using Atomic Layer Etching and Gate Field Plate for High-Power Device Applications. Micromachines. 2023;14(8):1582. doi:10.3390/mi14081582
BibTeX
@article{Liu2023,
author = {Liu, An-Chen and Tu, Po-Tsung and Chen, Hsin-Chu and Lai, Yung-Yu and Yeh, Po-Chun and Kuo, Hao-Chung},
title = {Improving Performance and Breakdown Voltage in Normally-Off GaN Recessed Gate MIS-HEMTs Using Atomic Layer Etching and Gate Field Plate for High-Power Device Applications},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {8},
pages = {1582},
doi = {10.3390/mi14081582}
}
EUVIMED