Highly Conductive and Reusable Cellulose Hydrogels for Supercapacitor Applications
Micromachines · 21.07.2023 · 14 (7) · 1461
DOI: 10.3390/mi14071461 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 21.07.2023. Verfasst von Nujud Mohammed Badawi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Ionics, Department of Physics, Faculty of Science, Universiti Malaya, Kuala Lumpur 50603, Malaysia. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deputyship for Research and Innovation, Ministry of Education in Saudi Arabia.
Abstract (Originalsprache)
We report Na-Alginate-based hydrogels with high ionic conductivity and water content fabrication using poly (3,4-ethylene dioxythiophene) (PEDOT): poly (4-styrene sulfonic acid) (PSS) and a hydrogel matrix based on dimethyl sulfoxide (DMSO). DMSO was incorporated within the PEDOT:PSS hydrogel. A hydrogel with higher conductivity was created through the in-situ synthesis of intra-Na-Alginate, which was then improved upon by H2SO4 treatment. Field emission scanning electron microscopy (FESEM) was used to examine the surface morphology of the pure and synthetic hydrogel. Structural analysis was performed using Fourier-transform infrared spectroscopy (FTIR). Thermogravimetric analysis (TGA), which examines thermal properties, was also used. A specific capacitance of 312 F/g at 80 mV/s (energy density of 40.58 W/kg at a power density of 402.20 W/kg) at 100 DC mA/g was achieved by the symmetric Na-Alginate/PEDOT:PSS based flexible supercapacitor. The electrolyte achieved a higher ionic conductivity of 9.82 × 10−2 and 7.6 × 10−2 Scm−1 of Na-Alginate and a composite of Na-Alginate/PEDOT:PSS at 25 °C. Furthermore, the supercapacitor Na-Alginate/PEDOT:PSS//AC had excellent electrochemical stability by showing a capacity retention of 92.5% after 3000 continuous charge–discharge cycles at 10 mA current density. The Na- Alginate/PEDOT:PSS hydrogel displayed excellent flexibility and self-healing after re-contacting the two cut hydrogel samples of electrolyte for 90 min because of the dynamic cross-linking network efficiently dissipated energy. The illumination of a light-emitting diode (LED) verified the hydrogel’s capacity for self-healing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centre for Ionics, Department of Physics, Faculty of Science, Universiti Malaya, Kuala Lumpur 50603, Malaysia.
- Department of Physics, Faculty of Science, College of Science, University of Hafr Al-Batin, Hafer Al-Batin 39921, Saudi Arabia.
- King Abdullah Institute for Nanotechnology, King Saud University, P.O. Box 2455, Riyadh 11451, Saudi Arabia.
- Graphene Research Institute and Institute of Nano and Advanced Materials Engineering, Sejong University, Seoul 143-747, Republic of Korea.
ORCID-Profile: Nujud Mohammed Badawi, Ramesh Kasi, Sajjad Hussain
Förderung
- Deputyship for Research and Innovation, Ministry of Education in Saudi Arabia
Zitieren
APA
Badawi, N. M., Batoo, K. M., Subramaniam, R., Kasi, R., Hussain, S., Imran, A., & Muthuramamoorthy, M. (2023). Highly Conductive and Reusable Cellulose Hydrogels for Supercapacitor Applications. Micromachines, 14(7), 1461. https://doi.org/10.3390/mi14071461
Vancouver
Badawi NM, Batoo KM, Subramaniam R, Kasi R, Hussain S, Imran A, et al. Highly Conductive and Reusable Cellulose Hydrogels for Supercapacitor Applications. Micromachines. 2023;14(7):1461. doi:10.3390/mi14071461
BibTeX
@article{Badawi2023,
author = {Badawi, Nujud Mohammed and Batoo, Khalid Mujasam and Subramaniam, Ramesh and Kasi, Ramesh and Hussain, Sajjad and Imran, Ahamad and Muthuramamoorthy, Muthumareeswaran},
title = {Highly Conductive and Reusable Cellulose Hydrogels for Supercapacitor Applications},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {7},
pages = {1461},
doi = {10.3390/mi14071461}
}
EUVIMED