EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

RisCO2: Implementation and Performance Evaluation of RISC-V Processors for Low-Power CO2 Concentration Sensing

Ricardo Núñez-Prieto iD, David Castells-Rufas iD, Lluís Terés-Terés iD

Micromachines · 04.07.2023 · 14 (7) · 1371

DOI: 10.3390/mi14071371 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 04.07.2023. Verfasst von Ricardo Núñez-Prieto und 2 weiteren Autor:innen. Beteiligte Einrichtung: Barcelona Supercomputing Center (BSC), 08034 Barcelona, Spain. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Ministry of Science, Innovation, and Universities, Catalan Government (industrial Ph.D. programme), Catalan Government industrial Ph.D. programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the field of embedded systems, energy efficiency is a critical requirement, particularly for battery-powered devices. RISC-V processors have gained popularity due to their flexibility and open-source nature, making them an attractive choice for embedded applications. However, not all RISC-V processors are equally energy-efficient, and evaluating their performance in specific use cases is essential. This paper presents RisCO2, an RISC-V implementation optimized for energy efficiency. It evaluates its performance compared to other RISC-V processors in terms of resource utilization and energy consumption in a signal processing application for nondispersive infrared (NDIR) CO2 sensors.The processors were implemented in the PULPino SoC and synthesized using Vivado IDE. RisCO2 is based on the RV32E_Zfinx instruction set and was designed from scratch by the authors specifically for low-power signal demodulation in CO2 NDIR sensors. The other processors are Ri5cy, Micro-riscy, and Zero-riscy, developed by the PULP team, and CV32E40P (derived from Ri5cy) from the OpenHW Group, all of them widely used in the RISC-V community. Our experiments showed that RisCO2 had the lowest energy consumption among the five processors, with a 53.5% reduction in energy consumption compared to CV32E40P and a 94.8% reduction compared to Micro-riscy. Additionally, RisCO2 had the lowest FPGA resource utilization compared to the best-performing processors, CV32E40P and Ri5cy, with a 46.1% and a 59% reduction in LUTs, respectively. Our findings suggest that RisCO2 is a highly energy-efficient RISC-V processor for NDIR CO2 sensors that require signal demodulation to enhance the accuracy of the measurements. The results also highlight the importance of evaluating processors in specific use cases to identify the most energy-efficient option. This paper provides valuable insights for designers of energy-efficient embedded systems using RISC-V processors.

Schlagwörter

Stichwörter der Autor:innen

FPGANDIR CO2 sensorsPULPinoRISC-Venergy efficiencypower consumptionsignal demodulation

Autor:innen und Institutionen

  • Barcelona Supercomputing Center (BSC), 08034 Barcelona, Spain.
  • Microelectronics & Electronic Systems Department, Universitat Autònoma de Barcelona (UAB), 08193 Cerdanyola del Vallès, Spain.
  • Institut de Microelectrònica de Barcelona, IMB-CNM (CSIC), 08193 Cerdanyola del Vallès, Spain.

ORCID-Profile: Ricardo Núñez-Prieto, David Castells-Rufas, Lluís Terés-Terés

Förderung

  • Spanish Ministry of Science, Innovation, and Universities
  • Catalan Government (industrial Ph.D. programme)
  • Catalan Government industrial Ph.D. programme
  • Catalan Government Research Group

Zitieren

APA

Núñez-Prieto, R., Castells-Rufas, D., & Terés-Terés, L. (2023). RisCO2: Implementation and Performance Evaluation of RISC-V Processors for Low-Power CO2 Concentration Sensing. Micromachines, 14(7), 1371. https://doi.org/10.3390/mi14071371

Vancouver

Núñez-Prieto R, Castells-Rufas D, Terés-Terés L. RisCO2: Implementation and Performance Evaluation of RISC-V Processors for Low-Power CO2 Concentration Sensing. Micromachines. 2023;14(7):1371. doi:10.3390/mi14071371

BibTeX
@article{NezPrieto2023,
  author = {Núñez-Prieto, Ricardo and Castells-Rufas, David and Terés-Terés, Lluís},
  title = {RisCO2: Implementation and Performance Evaluation of RISC-V Processors for Low-Power CO2 Concentration Sensing},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {7},
  pages = {1371},
  doi = {10.3390/mi14071371}
}
Kostenlos starten →