EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel High Isolation 4-Port Compact MIMO Antenna with DGS for 5G Applications

Cem Güler iD, Sena Esen Bayer Keskin iD

Micromachines · 26.06.2023 · 14 (7) · 1309

DOI: 10.3390/mi14071309 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 26.06.2023. Verfasst von Cem Güler und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Airframe and Powerplant Maintenance, Kırklareli University, Kırklareli 39750, Turkey. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the design and realization of a simple and low-profile, four-port multiple-input-multiple-output (MIMO) antenna operating in a mm-wave band supporting 5G communication technologies. As part of the design methodology, the initial stage involved the development of a conventional monopole patch antenna optimized for operation at 26 GHz, which was matched to a 50 Ω stepped feed line. Afterward, a square-shaped defected ground structure (DGS) with semi-circle slots on the edges was placed on the ground to improve the isolation, and the circular and rectangular slots were incorporated as DGSs to optimize the antenna impedance bandwidth. Etching semi-circular-shaped slots on the ground plane achieved more than 34.2 dB isolation in the 26 GHz operating band. In addition, an arrangement of four symmetrical radiating elements was positioned orthogonally to minimize the antenna’s physical size and improve the isolation. The proposed MIMO antenna’s overall dimension was 25 × 25 mm2, which was printed on a Rogers 5880 substrate at a width of 0.787 mm and εr = 2.2. The proposed antenna covered the 5G mm-wave band with a 10 dB bandwidth ranging from 25.28–28.02 GHz, whereas the maximum gain attained for the proposed structure was 8.72 dBi. Additionally, the implementation of these slots effectively mitigated mutual coupling, resulting in reduced envelope correlation coefficient (ECC) values. Furthermore, other MIMO performance metrics, including channel capacity loss (CCL), mean effective gain (MEG), and diversity gain (DG), were analyzed for the proposed structure. The obtained results indicate its suitability for various usage areas, such as smart devices, mobile phones, and sensors in 5G applications.

Schlagwörter

Stichwörter der Autor:innen

5GDGSECCMIMOisolationslot

Autor:innen und Institutionen

  • Department of Airframe and Powerplant Maintenance, Kırklareli University, Kırklareli 39750, Turkey.
  • Electrical and Electronics Engineering Department, Kırklareli University, Kırklareli 39100, Turkey.

ORCID-Profile: Cem Güler, Sena Esen Bayer Keskin

Zitieren

APA

Güler, C., & Bayer Keskin, S. E. (2023). A Novel High Isolation 4-Port Compact MIMO Antenna with DGS for 5G Applications. Micromachines, 14(7), 1309. https://doi.org/10.3390/mi14071309

Vancouver

Güler C, Bayer Keskin SE. A Novel High Isolation 4-Port Compact MIMO Antenna with DGS for 5G Applications. Micromachines. 2023;14(7):1309. doi:10.3390/mi14071309

BibTeX
@article{Gler2023,
  author = {Güler, Cem and Bayer Keskin, Sena Esen},
  title = {A Novel High Isolation 4-Port Compact MIMO Antenna with DGS for 5G Applications},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {7},
  pages = {1309},
  doi = {10.3390/mi14071309}
}
Kostenlos starten →