EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-Printed Microfluidic One-Way Valves and Pumps

Hunter Hinnen iD, Matthew Viglione iD, Troy R Munro iD, Adam T Woolley iD, Gregory P Nordin iD

Micromachines · 23.06.2023 · 14 (7) · 1286

DOI: 10.3390/mi14071286 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.06.2023. Verfasst von Hunter Hinnen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical & Computer Engineering, Brigham Young University, Provo, UT 84602, USA. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIGMS NIH HHS, NIH HHS, National Institutes of Health.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

New microfluidic lab-on-a-chip capabilities are enabled by broadening the toolkit of devices that can be created using microfabrication processes. For example, complex geometries made possible by 3D printing can be used to approach microfluidic design and application in new or enhanced ways. In this paper, we demonstrate three distinct designs for microfluidic one-way (check) valves that can be fabricated using digital light processing stereolithography (DLP-SLA) with a poly(ethylene glycol) diacrylate (PEGDA) resin, each with an internal volume of 5–10 nL. By mapping flow rate to pressure in both the forward and reverse directions, we compare the different designs and their operating characteristics. We also demonstrate pumps for each one-way valve design comprised of two one-way valves with a membrane valve displacement chamber between them. An advantage of such pumps is that they require a single pneumatic input instead of three as for conventional 3D-printed pumps. We also characterize the achievable flow rate as a function of the pneumatic control signal period. We show that such pumps can be used to create a single-stage diffusion mixer with significantly reduced pneumatic drive complexity.

Schlagwörter

Stichwörter der Autor:innen

3D printingmicrofluidic mixermicrofluidic pumpmicrofluidicsone-way valve

Autor:innen und Institutionen

  • Department of Electrical & Computer Engineering, Brigham Young University, Provo, UT 84602, USA.
  • Department of Mechanical Engineering, Brigham Young University, Provo, UT 84602, USA.
  • Department of Chemistry & Biochemistry, Brigham Young University, Provo, UT 84602, USA.

ORCID-Profile: Hunter Hinnen, Matthew Viglione, Troy R Munro, Adam T Woolley, Gregory P Nordin

Förderung

  • NIGMS NIH HHS
  • NIH HHS
  • National Institutes of Health

Zitieren

APA

Hinnen, H., Viglione, M., Munro, T. R., Woolley, A. T., & Nordin, G. P. (2023). 3D-Printed Microfluidic One-Way Valves and Pumps. Micromachines, 14(7), 1286. https://doi.org/10.3390/mi14071286

Vancouver

Hinnen H, Viglione M, Munro TR, Woolley AT, Nordin GP. 3D-Printed Microfluidic One-Way Valves and Pumps. Micromachines. 2023;14(7):1286. doi:10.3390/mi14071286

BibTeX
@article{Hinnen2023,
  author = {Hinnen, Hunter and Viglione, Matthew and Munro, Troy R and Woolley, Adam T and Nordin, Gregory P},
  title = {3D-Printed Microfluidic One-Way Valves and Pumps},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {7},
  pages = {1286},
  doi = {10.3390/mi14071286}
}
Kostenlos starten →